The Dinan D210-2023 is a pair of 5mm wheel spacers for 5x112 hubs with a 66.5mm center bore. Dinan's listing gives the material as 6061 aluminum, with billet construction and a 5mm thickness, and the parts are CNC-machined. Buyers who want to push the wheel outward for a more aggressive stance, or to make room for larger brake calipers, get the outward offset they need without swapping wheels. The manufacturer says spacers create the offset needed for stance or the clearance needed to clear brake calipers. Dinan's own install literature for related kits adds that its spacers are made for its own BMW fitments, which is meant to avoid the balance problems common with universal spacers.
Fitment is the first thing to check. Dinan's application guide lists the G chassis with a 5x112 bolt pattern and M14x1.25 lug bolts. The manufacturer also notes exceptions, such as certain F-chassis M and X models that use the G-chassis spacer fitment, so confirm your chassis code before ordering. Since longer lug bolts are required and sold separately, plan for extended M14x1.25 studs at checkout. Shoppers searching for 5x112 66.5mm 5mm spacers, G-chassis wheel spacers, or extended M14x1.25 lug bolts will find the key specs here.
The manufacturer states that longer lug bolts are required and are sold separately, so you will need extended bolts in addition to the spacer pair.
Dinan's application guide maps 5x112 hubs to the G chassis with M14x1.25 lug bolts, and the manufacturer notes some exceptions. Confirm your chassis code with the manufacturer before ordering.
The manufacturer offers the same 66.5mm center bore in several thicknesses, including 2mm, 3mm, 4mm, 6mm, 7mm, and 10mm. The right thickness depends on how much offset or caliper clearance you need.
Spacer installation is a bolt-on job, but it requires lifting the car safely and handling longer studs. Dinan's install sheets for related spacer kits say to use jack stands rather than a jack alone, and to keep front and rear lug bolts separated so they are not mixed up when wheels come off. Those sheets also say the spacer's countersunk pilot hole should face the brake rotor, and they call for at least 1/8" of clearance between the rim and the strut tube. Confirm these steps and the torque spec with the manufacturer for this specific kit before installing, and use a torque wrench for the M14x1.25 lug bolts.