Dinan's D210-2030 is a 17mm wheel spacer set sold as a pair, built for 5x112 hubs with a 66.5mm center bore. The manufacturer lists it as CNC-machined 6061 aluminum with a weight-saving design and an anodized black finish. Spacers like this push the wheel outward to create a wider stance or to clear larger brake calipers. Dinan designs its spacers to avoid the balance problems that the manufacturer associates with universal spacers, which makes this billet set a more predictable choice than a generic budget spacer. Fitment is set by the lug thread and chassis: the manufacturer's application guide pairs 5x112 spacers with G-chassis vehicles and M14x1.25 lug bolts, with a few listed exceptions. For long-tail searches, this is a 17mm 5x112 66.5mm hub-centric-style spacer for G-chassis BMWs and M14x1.25 extended-stud setups.
Owners on user forums report that 17mm spacers on stock rims typically call for 45mm extended bolts, while non-stock wheels require their own bolt-length measurements. Longer bolts are required with any spacer and are sold separately, so budget for a matching extended lug bolt set. The manufacturer also notes that hub-centric rings are included on its larger spacers, so confirm ring inclusion for this thickness before ordering. For a clean install, plan on lifting the vehicle onto jack stands, keeping front and rear bolts separated, and checking tire-to-strut clearance after the first drive.
The manufacturer states that longer bolts are required with wheel spacers and that they are sold separately. Owners on user forums report that 17mm spacers on stock rims typically use 45mm bolts.
The manufacturer's application guide lists 5x112 spacers for the G chassis with M14x1.25 lug bolts. The guide notes exceptions for some models, so confirm your vehicle's thread before ordering.
Owners on user forums note that non-stock rims require custom measurements to determine the correct bolt length, since bolt hole thickness and seat geometry can differ from stock.
This is a moderate-difficulty job that suits a home mechanic with a torque wrench, a lug wrench or impact tool, and secure jack stands. Never work under a vehicle supported only by a jack. Mark which bolts belong to the front and rear axles, because bolt lengths can differ and mixing them up is a common mistake. Clean the hub face and wheel mounting surfaces before fitting the spacers, and torque the new extended bolts to the specification in the manufacturer's install sheet for this kit, since torque values in Dinan's install documents vary by kit. Recheck torque after the first 50 to 100 miles and confirm clearance to the strut and brake components.