Free Shipping on Orders Over $99  ·  No Code Needed

Dinan Wheel Spacers - 5x112 - 66.5mm CB - 15mm Thick (Set of 2)

*Photo may not represent actual product

The Dinan D210-2029 is a set of two CNC-machined 6061 aluminum wheel spacers, 15mm thick, for 5x112 hubs with a 66.5mm center bore. The manufacturer describes them as billet, weight-saving, and anodized black, and says the larger sizes carry hub-centric rings. Each spacer pushes the wheel outward from the hub, which dials in offset for a more aggressive stance or added brake caliper clearance. A machined, bore-matched spacer like this is the practical alternative to an unmatched universal spacer that leaves the wheel to center on lug clamping alone.

Fitment is where buyers should slow down. The manufacturer's application guide pairs G-chassis BMWs on 5x112 hubs with M14x1.25 lug bolts, and it notes that certain F-series M and X models share that setup. Owners on user forums running 12mm or 15mm spacers on stock rims report that 40mm bolts work, while a 17mm spacer called for 45mm bolts, so bolt length has to track spacer thickness. The manufacturer's listings for this spacer family say longer lug bolts are required and sold separately, so budget for them and confirm your application before ordering.

  • Bolt Pattern: 5x112
  • Center Bore: 66.5mm
  • Thickness: 15mm
  • Quantity: Set of 2
  • Material/Construction: CNC-machined 6061 aluminum billet
  • Finish: Anodized black
  • Centering: Hub-centric rings on larger spacers
  • Lug Bolt Thread (G-chassis application): M14x1.25
  • Lug Bolts: Longer bolts required, sold separately
  • Part Number: D210-2029

FAQ:

How long do my lug bolts need to be with these 15mm spacers?

The manufacturer says longer lug bolts are required and sold separately. Owners on user forums running 15mm spacers on stock rims report that 40mm bolts work, while 17mm spacers needed 45mm bolts. Confirm the length for your specific wheel and vehicle before installing.

What lug bolt thread does this kit require?

The manufacturer's application guide lists M14x1.25 lug bolts for G-chassis vehicles on 5x112 hubs, and it notes that certain F-series M and X models use that same G-chassis fitment. Confirm your chassis before ordering.

Can I run different thicknesses front and rear?

Owners on user forums report running 12mm spacers in front and 15mm in the rear. One owner said they would choose 10mm in front because the front tires stick out more. Thickness is a fitment and clearance decision, so test-fit before final torque.

Installing it yourself

This is a bolt-on job for a home mechanic with a torque wrench, a breaker bar, and a socket that fits the lug nuts, plus a secure set of jack stands. The manufacturer's install sheets for other Dinan spacer kits warn against working under a vehicle supported only by a jack, and they also stress keeping front and rear lug bolts separated, since mixing them up is a real risk. Test-fit the wheel and check tire and fender clearance before final torque. One X3 owner on a user forum installed a pair and removed them right away because the wheels stuck out too far. Torque to the figure the manufacturer confirms for your application rather than a generic number.

  • MPN: D210-2029
  • Manufactured by: Dinan
  • Units per SKU: 1
  • In Stock: 4, On Order: 4
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$107.95

MSRP / List price
Member Price
Your price after signing in
$107.95
Only 4 left in stock — order soon
Add to Cart:
MPN
D210-2029
Manufacturer
Dinan
Availability
Only 4 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout