The Dinan D210-2028 is a matched pair of 12mm wheel spacers sized for 5x112 hubs with a 66.5mm center bore. Each piece is CNC-machined from 6061 billet aluminum and finished in anodized black. The manufacturer presents the 12mm step as a way to push the wheel outward for a fuller stance or extra clearance around larger brake calipers. Dinan's install sheets describe its spacers as developed for its BMW fitments to avoid the balance problems common with universal spacers, which is the main reason to pay more than for a generic pair.
Fitment depends on hub pattern and lug thread as much as on model name. Dinan's application guide lists the G chassis on 5x112 with M14x1.25 lug bolts, though it notes that exceptions exist. Owners on BMW G05 X5 forums have run 12mm spacers on stock rims with 40mm bolts and describe the thin profile as avoiding bolt-to-hub designs, which makes this a low-risk upgrade for stance or brake-clearance builds.
The manufacturer's general application guide lists G chassis vehicles on a 5x112 pattern with M14x1.25 lug bolts. The guide notes that exceptions apply, so confirm the thread for your specific vehicle before ordering.
The manufacturer states that longer bolts are required and that they are sold separately. Owners on user forums running 12mm spacers on stock G05 rims report using 40mm bolts. Non-stock wheels require custom measurements to determine the correct bolt length.
Because a spacer pushes the wheel outward, extended lug bolts are mandatory, and the manufacturer sells them separately, so budget for them with the spacers. Match the thread pitch to your hub before ordering, and measure or calculate bolt length if your wheels are not stock. Lift the vehicle safely, seat the spacer flush against the hub face with clean mating surfaces, mount the wheel, and torque the studs to the manufacturer's specification in a star pattern. Recheck torque after the first few drives, since new spacer and bolt combinations can settle.