The Dinan D210-2027 is a set of two 10mm wheel spacers machined from billet 6061 aluminum for a 5x112 bolt pattern and a 66.5mm center bore. Dinan positions its spacer line as engineered for exacting bolt-pattern accuracy, hub-centric design and seamless integration. Compared with a generic universal spacer, a matched kit like this is built to the specific hub, which is the main reason to choose it. The manufacturer also notes that spacers can add clearance for larger brake calipers. Buyers searching for a 10mm 5x112 66.5mm G-chassis BMW spacer, M14x1.25 extended lug bolts, or a track-day wheel stance will find the specifications here.
The manufacturer's application guide lists G chassis with a 5x112 bolt pattern and M14x1.25 lug bolts, and it names the F9x M5/M8 and F48/F39 X1/X2 as examples that use the G chassis spacer fitment, though exceptions do apply. Extended lug bolts are not included. The manufacturer says extended length bolts are sold separately, and appropriately sized bolts for the selected spacer kit are suggested below. Owners on user forums stress that the new bolts need to give the same amount of thread engagement, with the spacer stacked, as the stock bolts gave without it. Check that before installing, and confirm torque values with the manufacturer.
Yes. According to the manufacturer, extended-length bolts are sold separately, and the correct length for each spacer kit is suggested on the product page. Owners on user forums recommend confirming that the new bolts have enough thread engagement before driving the vehicle.
The manufacturer's guide lists G-chassis vehicles with 5x112 bolt patterns and M14x1.25 lug bolts. It also cites F9x M5/M8 and F48/F39 X1/X2 models as examples that use this fitment, but notes that exceptions apply, so confirm your exact model and year before ordering.
This is a bolt-on job that most home mechanics can complete with basic hand tools. Raise the vehicle safely, remove the wheel, slide the spacer over the hub, and reinstall the wheel using the longer extended lug bolts. Owners on user forums advise matching the thread engagement to what the stock bolts gave, because short bolts are a common problem with spacer installs. Check the bolt torque in the manufacturer's documentation or your service manual, since a verified torque figure for this kit was not confirmed during research. Retorque after a short drive, following the manufacturer's guidance.