The H&R 1457011 is a single replacement wheel bolt with an M14x1.5 thread, a 70mm shank, and a 22mm spanner head. Its surface is chromed and the colour is silver, per the manufacturer's configurator. H&R sells a broad range of specialty wheel tightening bolts, studs, and lug nuts, available with a multitude of thread sizes and seat types. Choose this bolt over a generic 14mm bolt when the length and seat must be exact. Thread pitch and seat shape are the two things that decide whether a bolt seats properly and clamps the wheel. The 70mm length suits a spacer build. Spacers that fit between the wheel and hub need longer bolts that are not supplied, according to H&R's spacer documentation. Search terms this bolt matches include M14x1.5 70mm Ferrari wheel bolt, extended lug bolt for wheel spacers, and 22mm hex H&R 1457011. The manufacturer's distributor listing shows this bolt for Ferrari / Maserati applications. Seat type is the open question. Listings and owners on user forums describe factory Ferrari wheels as using ball-seat bolts, while other sources describe a taper seat. Check your wheel's seat before ordering.
The manufacturer lists an M14x1.5 thread, a 70mm shank length, and a 22mm spanner size for this part number.
The manufacturer states that spacers between the wheel and hub require longer bolts than stock. Whether 70mm is the correct length depends on your spacer thickness, so confirm with the manufacturer.
Swapping these bolts is a straightforward job with basic hand tools, but it still needs care. Hand-thread each bolt so it does not cross-thread, then snug the set in a star pattern. Tighten to the wheel or vehicle maker's torque specification with a calibrated torque wrench, and avoid impact guns, which can damage the threads and seat. If you are fitting spacers, confirm the bolt length and seat type before mounting the wheel, and spin the wheel to check for clearance. Re-check torque after the first drive.