The Dinan D220-0012 is an OEM-style cone-seat lug bolt, 39mm long, sold as a set of ten. Dinan describes its wheel bolts as engineered for accurate fitment, correct thread size and ideal length especially when used with spacers on BMW, Mercedes-Benz and Toyota performance vehicles. The steel bolts carry a black zinc finish, and Dinan lists this part on its BMW M-model and X1 wheel-bolt pages.
Stock-length hardware cannot cover a spacer's extra thickness, so matching bolt length to spacer thickness is what keeps thread engagement sufficient. This set is designed for 10mm and 12mm spacers, which removes the guesswork of cutting or stacking hardware. Choosing these over cheaper generic extended bolts makes sense when you want a thread size, seat style and length that are documented for a specific spacer system. Enthusiasts searching for 39mm M12x1.5 cone seat lug bolts for 10mm or 12mm wheel spacers, or 5x120 E-chassis spacer bolts, will find the fitment details below.
The manufacturer states this set is for use with 10mm and 12mm spacers. Use it only with spacers in that range.
No. The manufacturer's general application guide lists the E chassis with a 5x120 pattern and M12x1.5 bolts, while the F chassis uses M14x1.25 bolts at 5x120 and the G chassis uses M14x1.25 bolts at 5x112. The guide notes that exceptions apply, so confirm your chassis code before ordering.
Installation is a straightforward job for someone comfortable with wheel removal, but it requires a calibrated torque wrench and the correct lug socket. Before fitting the wheel, install the new hardware by hand to confirm the thread size is correct; there should be no binding. Keep the threads and seats clean and dry, since the torque specification applies only to clean, dry threads, and lubricating threads or seats changes the friction coefficient. Snug the bolts by hand, then tighten in a star pattern, first to about half the total torque value and then to the final specification, repeating the same pattern. Avoid an impact gun for final tightening. Use the torque value in your vehicle's owner's manual, and re-torque after the first drive, because published guidance on the re-torque interval varies; confirm the schedule with the manufacturer.