Free Shipping on Orders Over $99  ·  No Code Needed

Dinan Lug Bolts - Cone Seat - M14x1.25 - 30mm - Black (Set of 10)

*Photo may not represent actual product

These are 30mm extended-length lug bolts in M14x1.25 thread, made for running wheels on spacers rather than a bare hub. The manufacturer's feature list describes steel construction, an OEM-style cone-seat design, a black zinc coating, and a set of ten. Spacers push the wheel outward, and the original wheel bolts lose some of their thread engagement because the wheel now sits further out from the hub. The longer shank is what compensates for that loss.

Dinan says its bolts are engineered for accurate fitment, correct thread size and ideal length especially when used with spacers on BMW, Mercedes-Benz and Toyota performance vehicles. That brand-matched fit is the main reason to choose this over an unverified generic extended bolt. Dinan's BMW application pages list this part number for the 2023 X3, and the same bolt appears on its pages for the M2, M240i, and X5. Dinan's application guide pairs F-chassis cars with 5x120 and G-chassis cars with 5x112, and the manufacturer notes exceptions such as the F9x M5/M8 and F48/F39 X1/X2's, which utilize the G chassis spacer fitment of 5x112 w/ M14x1.25 bolts.

Installation suits a home mechanic with a torque wrench, but the thread must match your spacer kit exactly. Torque specifications are usually found in the vehicle's owner's manual. Torque specifications are for dry threads only. Lubricating hardware threads and seats alters the friction generated at the lug seat, which results in inaccurate torque readings and/or over-torqueing of the hardware. Avoid impact-gun seating, since attempting to fully tighten hardware with impact guns/torque sticks also prevents using a click-type torque wrench to confirm the specified amount of torque is present. Recheck torque after the first 50 to 100 miles, especially with new wheels or when studs are replaced.

  • Thread Size: M14x1.25
  • Seat Type: Cone (OEM-style)
  • Length: 30mm
  • Material: Steel
  • Finish: Black zinc
  • Quantity: Set of 10
  • Bolt Pattern Pairing (per manufacturer guide): F-chassis 5x120 and G-chassis 5x112, both M14x1.25
  • Manufacturer Part Number: D220-0002

FAQ:

Are these meant to be used without wheel spacers?

The manufacturer describes these as longer lug bolts for use with wheel spacers, and its spacer listings state that longer bolts are required when spacers are fitted.

Which chassis use the M14x1.25 thread?

Per the manufacturer's general spacer and bolt application guide, F-chassis vehicles use 5x120 with M14x1.25 bolts and G-chassis vehicles use 5x112 with M14x1.25 bolts. E-chassis vehicles use M12x1.5, and the manufacturer notes that exceptions apply, so confirm your model in the guide before ordering.

Which BMW models does Dinan list this bolt for?

The manufacturer's BMW application pages list part D220-0002 for the 2020 M2, the M240i, the 2023 X3, and the 2024 X5, among other models. Check the application guide against your exact chassis and spacer kit.

Installing it yourself

Mounting these bolts is a moderate DIY job: you need a jack and stands, a torque wrench, a socket that fits the bolt head, and anti-seize if your spacer kit calls for it, although lubricating the seats changes torque readings. Confirm the thread size and bolt length against your spacer kit before you start, and do not mix in stock bolts. Torque to the value in your vehicle's owner's manual, tighten in a star pattern, and recheck after the first 50 to 100 miles of driving.

  • MPN: D220-0002
  • Manufactured by: Dinan
  • Units per SKU: 1
  • In Stock: 3
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$45.52

MSRP / List price
Member Price
Your price after signing in
$45.52
Only 3 left in stock — order soon
Add to Cart:
MPN
D220-0002
Manufacturer
Dinan
Availability
Only 3 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout