The Dinan D220-0003 is a ten-piece steel lug bolt set with an M14x1.25 thread and a cone seat, sized at 33mm so it can reach through a wheel spacer and still engage the hub. The manufacturer describes it as OEM-style cone-seat hardware with a black zinc finish. The manufacturer also notes that spacers call for longer bolts, so reusing factory hardware is not an option for a spacer setup. Dinan sells the bolts on their own, and they also come as part of its 4mm, 5x112 spacer kit. Buyers searching for 33mm M14x1.25 cone seat spacer bolts for BMW F and G chassis cars will find this length matched to the thinnest spacers in Dinan's lineup.
The manufacturer's application guide pairs F-chassis cars with a 5x120 bolt pattern and G-chassis cars with 5x112, both using M14x1.25 bolts, and it flags exceptions such as certain F9x M5/M8 and F48/F39 X1/X2 models. Dinan's own BMW M-model, 2022 X3, and 2020 M2 category pages list this part number, but fitment lists elsewhere vary, so confirm your model year with the manufacturer before ordering. For installation, the bolts should go in by hand in a star pattern, then be torqued with a calibrated torque wrench. Avoid impact wrenches for final tightening, and re-torque after the first 50 to 100 miles.
The manufacturer lists the 33mm bolt for 4mm and 5mm spacers, the 35mm bolt (D220-0004) for 6mm, 7mm and 8mm spacers, and the 40mm bolt (D220-0005) for 10mm and 12mm spacers. All three use the same M14x1.25 thread, so spacer thickness is what determines the length you need.
Not by default. The manufacturer offers this bolt as an included part in its 4mm, 5x112 spacer kit, but it is also sold separately as a set of ten.
The manufacturer's BMW M-model, 2022 X3, and 2020 M2 category pages list this part number. Fitment lists from other sources differ on model years, so confirm your vehicle against the manufacturer's application guide before ordering.
Replacing lug bolts with spacers is a hands-on job that a careful home mechanic can handle with basic tools: a lug socket, a calibrated torque wrench, and a jack with stands. The bolts must be longer than stock to clear the spacer, so do not reuse factory lug bolts. Clean the spacer and hub mating surfaces so the spacer sits flat, and check that the wheel seats fully on the spacer. Spacer installation is commonly recommended for trained technicians, so if you have doubts, have a shop do it. Look up the final torque value in your vehicle's owner's manual, since the manufacturer's listing for this bolt does not give one, and re-check torque after the first 50 to 100 miles of driving.