The H&R 1456502 is a 65 mm M14 x 1.5 wheel bolt with a 17 mm hex head and an R14 round seat, the ball-type interface used on many Mercedes-Benz wheels. The manufacturer's configurator lists it as a silver, movable round-head design, so the seat can adjust to match the wheel's contact face. Compared with worn factory hardware or unbranded bolts, this H&R unit gives you a known thread pitch and a German-built steel fastener for wheel fitment work. It is the right choice when you need extra thread reach, for example when running wheel spacers. If you want theft protection, the manufacturer also offers a set that includes a matching wheel lock.
Before you order, confirm the seat type on your wheels, because ball-seat and tapered-seat bolts are not interchangeable. Use the 17 mm socket to tighten the bolt to the torque your vehicle's manual specifies, and check that the thread has full engagement in the hub or spacer without bottoming out. Owners on user forums often buy a few extra bolts so a single damaged one does not hold up a wheel swap or a track-day setup. Searches for "Mercedes R14 ball seat lug bolt 65mm," "M14x1.5 spacer wheel bolt," and "17mm hex lug bolt silver" tend to match this part.
The manufacturer lists 1456502 as the silver version and 1456502SW as the black version, both in the same 65 mm, M14 x 1.5, 17 mm spanner configuration.
No. The manufacturer lists a separate set code (1456502SET) that includes a wheel lock. The single bolt is sold on its own.
This is a straightforward bolt-on job that needs a 17 mm socket, a torque wrench, and the vehicle's torque specification. Confirm the seat type matches your wheel before you start, since using a bolt with the wrong seat can cause the wheel to loosen. If you are adding spacers, measure thread engagement with the new bolt first, since a 65 mm length may not suit every spacer and hub combination. Re-torque after the first few drives, as recommended for aftermarket wheel hardware.