Free Shipping on Orders Over $99  ·  No Code Needed

H&R Wheel Bolts Type 14 X 1.5 Length 50mm Type Audi Removable Ball (R14) 17mm - Black

*Photo may not represent actual product

The H&R 1455007ASW is a 14 x 1.5 wheel bolt with a 50mm shank, a black finish, a 17mm hex head, and an Audi removable ball (R14) seat. H&R's own catalog lists the same 50mm R14 specification in silver as 1455007A, so the black version is the one matching this listing. Choosing it over a generic bolt means buying hardware dimensioned to a known seat profile instead of guessing at length, which matters when a wheel spacer or non-stock wheel changes how much thread the bolt must reach.

Owners on user forums who run spacers suggest adding the spacer thickness to the stock bolt length as a starting estimate, then checking thread engagement for the exact stack. Seat type is the critical check. Confirm your wheel's seat profile before ordering, because a mismatched seat can prevent proper clamping and damage the wheel. Searching for an H&R 14x1.5 50mm Audi R14 black lug bolt, an M14x1.5 removable ball seat wheel bolt, or an Audi Q5 spacer extended bolt will surface the right comparison points.

  • Manufacturer: H&R
  • Manufacturer Part Number: 1455007ASW
  • Thread Size: 14 x 1.5 (M14x1.5)
  • Shank Length: 50mm
  • Seat Type: Audi Removable Ball (R14)
  • Hex Head Size: 17mm
  • Finish: Black
  • Sold As: Single bolt

FAQ:

How does this black bolt differ from the silver 1455007A?

The manufacturer lists the 1455007A as the silver version of the same 14 x 1.5, 50mm, R14, 17mm bolt. The black version carries a different part code, so confirm the finish you want when ordering.

Which Audi models use this bolt?

The manufacturer's own listing for the 50mm R14 bolt set gives Audi Q3 and Q5 as examples. Confirm your specific wheel's seat profile and hub requirements before installing.

Do I need longer bolts when running wheel spacers?

Owners on user forums say extended bolts are needed to reach through added spacer thickness, and suggest adding the spacer thickness to the stock bolt length as a rough guide. Verify thread engagement for your exact setup, since a longer bolt is not automatically better.

Installing it yourself

This is a manageable job for a home mechanic with a 17mm socket, a calibrated torque wrench, and a wire brush. Clean the hub and wheel mating surfaces first, then thread each bolt by hand so it spins freely and does not cross-thread. Snug all bolts in a star pattern, then torque them to the value in your vehicle's service manual, again in a star pattern. Torque figures discussed on user forums vary by model, so do not rely on forum numbers. Recheck torque after the first few drives, especially after installing spacers. Never use an impact gun for final tightening.

  • MPN: 1455007ASW
  • Manufactured by: H&R
  • Units per SKU: 1
  • In Stock: 40
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$9.95

MSRP / List price
Member Price
Your price after signing in
$9.95
In Stock — ships same day if ordered before 5pm PST
Add to Cart:
MPN
1455007ASW
Manufacturer
H&R
Availability
In Stock (40)
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout