The H&R 1454502SW is a black M14 x 1.5 wheel bolt with a 45mm threaded length, a 17mm hex head, and an R14 Mercedes-style ball seat. The manufacturer lists it in its wheel bolt range as a single bolt, with a 10-piece set also available. It works as a replacement fastener for a matching ball-seat hub, and its extra length suits applications where a wheel spacer sits between the wheel and hub.
A stock bolt is sized for the factory wheel, so once you add spacers or change wheels, a correctly matched 45mm ball-seat bolt is what keeps the wheel clamped properly. Generic hardware-store bolts often have the wrong seat geometry for this hub style, and that mismatch is what causes a wheel to loosen. Because H&R makes this bolt in Germany as part of its specialty fastener line, buyers searching for a durable M14x1.5 R14 ball-seat lug bolt for a Mercedes-pattern hub can source it from the same range as the spacers they may already be running.
Yes. The manufacturer's general installation instructions call for retightening wheel bolts and nuts with a torque wrench after about 100 km (roughly 60 miles). Owners on user forums also recommend a re-check after the first 50 to 100 miles.
The manufacturer states that spacers are fitted using longer bolts than the factory ones, and that you should specify the cone type and the extra length needed when ordering. Confirm the total length you need for your spacer thickness before ordering.
The manufacturer lists this part number as a single bolt and also as a set of 10 under the same part number with a SET suffix.
Installation is a standard wheel-off, wheel-on job that requires a 17mm socket, a calibrated torque wrench, and a clean hub face. Hand-start each bolt to avoid cross-threading, then snug them in a star or crisscross pattern. Owners on user forums advise against finishing with an impact gun, because it makes accurate torque impossible to confirm. Torque to your vehicle manufacturer's specification, not a generic number. If you are fitting spacers, the manufacturer's general instructions also call for checking wheel alignment and headlight aim afterward.