The H&R 1454507ASW is a black M14x1.5 wheel bolt with a 45mm thread and a 17mm hex head, built around a removable ball seat designated R14. The manufacturer's listing places this bolt in its Audi / Aston Martin Removable Ball, R14 group, sold as a single bolt or a box of ten. Stock Audi hardware usually has a shorter seat, and OEM Audi wheels, with the exception of the Q-Series and SQ-Series, use an R13 ball seat bolt with a 27mm shaft length. A 45mm R14 bolt is the practical choice when spacers or aftermarket wheels need more thread engagement and a different seat radius. Forum members also warn that most companies are oblivious to this and sell the wrong bolts in their 'kits', so a bolt that matches the seat is what protects clamping force.
Before ordering, confirm your wheel's seat radius. OEM Audi Q-Series and SQ-Series wheels use an R14 ball seat bolt. Owners on user forums suggest starting from the stock bolt length and adding the spacer thickness to choose an extended length, such as 15mm spacer plus an original bolt length of 28mm would be 15+28=43. For installation, a DIYer needs a 17mm socket and a calibrated torque wrench. Keep threads and seats dry, hand-start each bolt, and tighten in a star pattern to your vehicle's wheel-bolt torque. Re-check torque after the first 50 to 100 miles.
The manufacturer lists it for Audi and Aston Martin applications that use a removable ball R14 seat. Owners on user forums report R14 seats on certain Q-series models, while most other Audis use R13, so confirm your wheel's seat type with the manufacturer before ordering.
The manufacturer offers the black 45mm bolt as a single unit and as a set of 10.
Owners on user forums note that stock Audi bolts are about 27mm long and that spacer setups usually require longer bolts sized to the spacer thickness. Confirm the exact length your spacer requires with the spacer manufacturer.
Installation is straightforward for a DIYer comfortable with lug work, but the details matter. Clean the hub face and threads, and avoid lubricating threads or seats, since lubricant changes the torque reading. Hand-start each bolt to prevent cross-threading, snug them in a crisscross pattern, and finish with a torque wrench rather than an impact gun. Make sure the bolt seats fully and that its length suits your spacer before final torque. Re-check torque after the first 50 to 100 miles.