This black H&R wheel bolt threads in at M14 x 1.5 and has a 43mm threaded length, driven by a 17mm hex head. It is built around a VW/Audi ball seat, so it suits wheels that locate on a ball rather than a cone. The manufacturer lists the non-SW 1454303 and the black 1454303SW in this same size and seat style, with the SW version offered individually or as a set of 10.
Choosing this bolt over a generic lug bolt comes down to seat match and length. A mismatched seat can leave a wheel poorly clamped or mark the bore, so a bolt sized and seated for VW/Audi ball seat wheels is the safer choice. The extra length also helps when you add wheel spacers, since the bolt must still reach the hub with enough thread engaged after the spacer thickness is included. Shoppers searching for a 14x1.5 ball seat lug bolt, a 43mm black VW Audi wheel bolt, or a spacer-compatible M14x1.5 ball seat bolt will find this part's specs match those terms.
The manufacturer lists both under the same thread size, length, seat type, and 17mm head. The SW suffix denotes the black finish, while the non-SW number is listed without that finish designation.
The manufacturer lists this bolt for VW/Audi ball seat applications. Because specific model and year coverage was not confirmed on the manufacturer's pages, confirm that your wheels use a ball seat before ordering.
Swapping these bolts is a straightforward job that requires a 17mm hex socket and a torque wrench. Check the seat style on your wheels first, because a ball seat bolt is only correct for ball seat wheels. If you run spacers, measure the spacer thickness and confirm the bolt still engages the hub with adequate thread before torquing. A torque value was not confirmed for this part, so use your vehicle manufacturer's specification.