The H&R 1454302SW is a M14 x 1.5 wheel bolt with a 43 mm threaded length, a 17 mm hex head, and a Mercedes ball (R14) seat in black. The manufacturer lists it as the black version of its 1454302 bolt and sells it individually or in boxes of ten. A radius (ball) seat is a different geometry from a 60-degree conical seat, so this bolt suits Mercedes factory alloys that use ball-seat fasteners. A generic bolt with the same thread size can look identical but may not seat correctly, and this H&R listing gives you a documented seat type and length to match against your wheels.
Check your wheel's bolt-hole seat before ordering, and confirm that the 43 mm length gives full thread engagement with your hub and any spacer you run. Owners on user forums report that factory torque values differ by model, with 96 lb-ft (130 Nm) cited for many Mercedes applications, so verify the figure in your vehicle's manual before final tightening. Searchers looking for a black M14x1.5 R14 ball seat lug bolt, a 43mm Mercedes ball seat wheel bolt, or an H&R 1454302SW replacement will find this part matches those terms.
The manufacturer lists the 1454302 and the 1454302SW with the same 14 x 1.5 thread, 43 mm length, Mercedes ball R14 seat, and 17 mm head. The SW version is the black-finished option.
The manufacturer lists a separate 1454303SW with the same thread and length but a VW / Audi ball seat rated R13. The seat radius differs from the R14 Mercedes version, so do not interchange them.
The bolt uses a 17 mm hex, so a 17 mm socket is the main tool needed, along with a calibrated torque wrench. Owners on user forums note that Mercedes torque specs vary by model and axle, so confirm the exact value in your owner's manual before tightening. Confirm the wheel seat is ball type before you start, since a bolt with the wrong seat will not center the wheel properly.