Free Shipping on Orders Over $99  ·  No Code Needed

H&R Wheel Bolts Type 14 X 1.5 Length 39mm Type Audi Ball - Black - Head 17mm

*Photo may not represent actual product

The H&R 14539033SW is a black M14x1.5 wheel bolt with a 39mm shank and an Audi ball seat, made for installs that need more thread reach than a stock bolt provides. The manufacturer lists a 17mm hex head and offers the bolt individually or in a box of ten. Owners on user forums note that Audi ball seats are commonly an R13 radius, so confirm the seat radius against your wheels before ordering.

The stock Audi bolt is about 28mm long according to owners on user forums, and the manufacturer states that wheel spacers need longer bolts that are not included with the spacer. This 39mm length fills that gap for 14x1.5 spacer applications. Cheaper bolts with the wrong seat cost less but are a real risk: forum members warn that ball-seat bolts on conical-seat wheels contact only part of the seat, which compromises clamping. Buyers searching for 14x1.5 39mm Audi ball seat lug bolts, R13 spacer bolts, or black 17mm hex wheel bolts should match seat and length first.

  • Manufacturer Part Number: 14539033SW
  • Thread Size: M14x1.5 (14 x 1.5)
  • Shaft Length: 39mm
  • Seat Type: Audi Ball (R13 listed for the set version)
  • Hex Head Size: 17mm
  • Finish: Black
  • Quantity Options: Single bolt or box of 10

FAQ:

Can I run these 39mm bolts without wheel spacers?

The manufacturer says its spacers require longer bolts that are not supplied, and owners on user forums put stock Audi bolts at about 28mm. Confirm that the 39mm length suits your hub and wheel combination before installing without a spacer.

Are these ball seat or conical seat bolts?

The manufacturer lists this part as an Audi ball seat. Owners on user forums report that many aftermarket wheels use conical seats and that the two types should not be interchanged, so check your wheel seat before buying.

What torque should I use?

Owners on user forums cite H&R installation sheets that call for torquing to the factory wheel specification. Confirm the exact figure for your vehicle with the manufacturer, since a specific value for this bolt was not confirmed in research.

Installing it yourself

This is a wheel-off job that most owners with a jack, stands, a 17mm socket, and a torque wrench can complete. Start each bolt by hand to avoid cross-threading, snug them in a crisscross pattern, and then torque to the factory wheel specification. Owners on user forums warn that overtightening can strip a lug or stretch a stud. H&R's general installation instructions call for retightening after about 100 km, so recheck torque after the first drive. Thread engagement minimums vary between forum posts, so verify the correct length for your setup with the manufacturer.

  • MPN: 14539033SW
  • Manufactured by: H&R
  • Units per SKU: 1
  • In Stock: 78
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$6.95

MSRP / List price
Member Price
Your price after signing in
$6.95
In Stock — ships same day if ordered before 5pm PST
Add to Cart:
MPN
14539033SW
Manufacturer
H&R
Availability
In Stock (78)
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout