The H&R 1453703 is a 14 x 1.5 wheel bolt with a 37mm shank, a 17mm hex head, and a VW/Audi ball seat, sold by the manufacturer as a single bolt or in a box of 10. 1453703 · 14 X 1.5 · 37mm · VW / Audi Ball · 17mm. Factory Audi and VW wheels use a rounded seat, and All factory lugs are 14x1.5 27mm R13 ball seat, according to owners on user forums. This 37mm bolt is longer than stock, so it can clamp a spacer and wheel together. Owners on user forums suggest adding the spacer thickness to the original bolt length. Matching the seat geometry matters more than the price difference, because a mismatched seat can loosen under load.
This is a universal-fit listing, so confirm the seat type of your wheels before ordering. Aftermarket wheels may use a ball seat (rounded) or cone seat (tapered) style bolt depending on the manufacturing. Torque values differ by model, and owners on user forums report figures from 120 Nm to 140 Nm on various Audi models, so check your service manual. Buy this bolt for replacing a lost or damaged factory bolt, or for running a spacer on an OEM-style wheel, such as an Audi A4 or VW Golf.
The manufacturer lists this bolt as a VW / Audi ball seat type, with the set listed as R13. Confirm the seat on your wheels before installing, because owners on user forums report that cone-seat wheels need a different bolt.
Yes. The manufacturer lists the bolt as available individually, and also as a set of 10.
Owners on user forums add the spacer thickness to the original bolt length. For example, a 15mm spacer on a 28mm stock bolt gives a 43mm bolt. The 37mm length here suits thinner spacers, so measure your setup before ordering.
Replacing or adding these bolts is a routine job for a home mechanic. You will need a 17mm socket, a torque wrench, wheel chocks, and jack stands. Lift the car safely, remove the old bolts, and thread the new ones in by hand to avoid cross-threading. Tighten them in a star pattern to the torque specified for your vehicle, which owners on user forums report varies by model, often around 120 Nm. Recheck the torque after the first short drive, since a loose bolt can cause wheel problems.