The H&R 1453702SW is a black M14 x 1.5 wheel bolt with a 37mm threaded length and a 17mm hex head. The manufacturer's catalog lists it with an R14 Mercedes ball seat, the rounded profile that sits in the recess of factory alloy wheels, so it suits owners replacing lost or damaged Mercedes-pattern bolts and wants a black finish. Choosing a bolt with a listed seat style and thread pitch, rather than an unmatched bulk bolt, removes guesswork at the hub, where a seat mismatch can loosen the wheel. Search terms that fit this part include H&R 1453702SW, M14x1.5 Mercedes ball seat bolt, 37mm R14 lug bolt, and black 17mm hex wheel bolt.
Fitment comes down to matching three things: thread, seat, and length. Owners on user forums note that the correct length usually matches the factory bolt for the donor vehicle, so measure a removed bolt before ordering. For torque, an owner's handbook quoted on a Mercedes forum calls for 96 lb-ft (130 Nm), while other forum members report 110 to 111 for longer-bolt applications, so details vary by model. Confirm the figure in your owner's manual or with the manufacturer before you set your torque wrench. Tighten in a crosswise pattern, never around the circle.
The manufacturer lists the 1453702SW with a Mercedes ball seat (R14), not a tapered or conical seat. Use it only on wheels with a matching ball recess, and check your wheel's seat before ordering.
Owners on user forums report different Mercedes torque figures depending on bolt length, including 96 lb-ft for shorter bolts and 110 to 111 for longer ones. Details vary by model, so confirm the value in your owner's manual or with the manufacturer.
The manufacturer lists the black 37mm bolt as a single item and as a box of 10 under the same part number family.
This is a straightforward bolt-for-bolt swap for a home mechanic with a jack and stands. You will need a 17mm socket, a calibrated torque wrench, and a lug wrench. Start each bolt by hand to avoid cross-threading, then snug the set in a crosswise pattern, following the owner's handbook sequence. Make the final torque pass with the vehicle lowered, and re-check torque after the first few drives. Measure the length of the bolt you are replacing first, since owners on forums warn that a longer or shorter bolt changes seat engagement.