H&R's 1453702 is a 14x1.5 metric wheel bolt with a 37mm threaded length, a Mercedes-style R14 ball seat, and a 17mm hex head. It is listed as 14 x 1.5, 37mm, Mercedes Ball R14, 17mm. A black-finished twin, the 1453702SW, is also offered. Seat geometry decides whether a bolt clamps a wheel properly, and for spherical collar wheel screws, the correct spherical radius (R12, R13, R14) must be selected. Buy this part when your wheel uses an R14 ball seat, not a generic cone bolt.
Length is the variable that changes most. New bolts must be longer than the original bolts by the width of the wheel spacer used. Thread engagement matters just as much: the manufacturer lists 12mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. Before final torque, confirm the bolt does not contact brake or ABS hardware and that the wheel should rotate freely. Owners searching for an M14x1.5 ball seat wheel bolt, a 37mm R14 lug bolt, or a spacer-compatible Mercedes bolt will find this part sold individually or in a box of ten.
The manufacturer lists this part as a Mercedes Ball R14 seat. Its guidance is that the bolt head must be identical to the existing bolt, so confirm your wheel's seat type before ordering.
Per the manufacturer, spacer-mounted wheels need longer bolts than stock, and the length must be extended by the spacer's thickness. Measure your setup before using this 37mm length.
This is a straightforward bolt-on job that needs a 17mm socket and a calibrated torque wrench. Thread each bolt in by hand first to avoid cross-threading, then tighten in a star pattern. Torque to the vehicle or wheel maker's specification rather than a generic figure, and recheck after the first few miles of driving.