Looking for a black 14 x 1.25 wheel bolt with a 50 mm shank and a 60-degree taper seat? The H&R 14255001SW matches that spec. The manufacturer's wheel-screw catalog lists it as M14x1.25, 50 mm long, with a 60° taper head and a 17 mm spanner size, and it is also sold as a 10-piece set. Generic bolts often get the seat profile or length wrong for a spacer setup. A mismatched seat can't clamp the wheel properly, so this bolt is the safer choice for a track or street-performance build.
Fitment depends on matching the factory screw, and the manufacturer stresses that the new head must be identical to the one already on the car. Taper, flat and round heads are all different. When paired with a wheel spacer, the bolt must be longer than stock. H&R says spacer kits generally need longer bolts that are ordered separately, along with the cone type and extra length. Owners on user forums report re-torquing new wheels after the first 50 to 100 miles as the hardware seats, and they tighten in a crisscross pattern with a torque wrench to the vehicle's published specification. Searches for M14x1.25 tapered lug bolt, 50mm black wheel bolt, and wheel spacer extended lug bolt will match this part.
The manufacturer says spacers typically require longer bolts than the factory set, which are ordered separately. When ordering, specify the cone type and the extra length you need.
The manufacturer says the new screw head must be identical to the installed one, since taper, flat, and round heads are not interchangeable. Check the head style and thread pitch before ordering.
Owners on user forums report re-torquing new wheels after the first 50 to 100 miles, because the wheel and hardware can settle and lose some clamping load.
This is a straightforward bolt-on job for a home mechanic with a 17 mm socket and a calibrated torque wrench. The manufacturer advises confirming that the screw-in depth is sufficient and that the correct tightening torque is applied before the wheel is considered secure. Confirm that the longer bolt doesn't contact brake or ABS components behind the hub. Torque to your vehicle's specification in a crisscross sequence, then recheck after the first 50 to 100 miles.