Free Shipping on Orders Over $99  ·  No Code Needed

H&R Wheel Bolts Type 12 X 1.5 Length 43mm Type Tapered Head 17mm - Black

*Photo may not represent actual product

The H&R 1254301SW is a single M12 x 1.5 wheel bolt with a 60° tapered (cone) seat, a 43mm threaded length, and a 17mm hex head, finished in black. The manufacturer lists it in its 12 x 1.5 bolt range, and its tapered seat is the cone geometry used by many European alloy wheels. Compared with a stock bolt, the longer 43mm shank is what lets you run a wheel spacer or a wheel with a deeper mounting pad without losing thread engagement. A cheap generic bolt of the wrong length or seat type can strip threads or seat poorly, so buying the correct H&R part is the safer route. Searches for "12x1.5 43mm tapered lug bolt," "M12x1.5 wheel spacer bolt length," and "60 degree cone seat black wheel bolt" will lead to this exact part.

Fitment is not tied to one make or model. It depends on your hub's thread pitch, the wheel's seat type, and how much shank you need once spacer thickness is added. Owners on user forums commonly compare stock bolt length plus spacer thickness against the bolt they bought, and they often find that a 43mm bolt is only right for certain spacer sizes, so measure before ordering. Installation is a standard job with a 17mm socket or hex driver and a calibrated torque wrench: hand-start each bolt to avoid cross-threading, tighten in a star pattern to your vehicle manufacturer's torque value, and never use an impact gun.

  • Manufacturer Part Number: 1254301SW
  • Thread Size: M12 x 1.5
  • Thread Length: 43mm
  • Seat Type: 60° tapered (cone seat)
  • Head Size: 17mm hex
  • Finish: Black
  • Quantity: Single bolt

FAQ:

Will this bolt fit my car?

The manufacturer lists this as a 12 x 1.5 tapered-seat bolt, but it is not built for one specific vehicle. Confirm that your hub uses M12 x 1.5 threads and that your wheels use a 60° cone seat before ordering. A ball-seat wheel will not seat correctly on this bolt.

Do I need the 43mm length for a wheel spacer?

Owners on user forums report that spacer bolts are chosen by adding spacer thickness to the original bolt length, then checking the result against the hub. Measure your stock bolt, add the spacer thickness, and make sure the 43mm bolt still leaves enough thread engagement without bottoming out.

What is the difference between this and the silver version?

According to the manufacturer's configurator, the silver 1254301 shares the same M12 x 1.5 thread, 43mm shaft, 60° taper, and 17mm spanner size. The black version differs in finish and carries a different article number.

Installing it yourself

This is a manageable DIY job that requires a 17mm socket or hex driver and a calibrated torque wrench. Clean the hub face and the wheel's seat area first so the cone seats evenly. Hand-start every bolt to prevent cross-threading, then tighten in a star pattern to your vehicle or wheel manufacturer's torque specification. Avoid impact guns, since they can damage the threads and seat. Re-check torque after the first few drives, and confirm the bolt length gives full thread engagement with your spacer or wheel before you drive.

  • MPN: 1254301SW
  • Manufactured by: H&R
  • Units per SKU: 1
  • In Stock: 82
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$3.95

MSRP / List price
Member Price
Your price after signing in
$3.95
In Stock — ships same day if ordered before 5pm PST
Add to Cart:
MPN
1254301SW
Manufacturer
H&R
Availability
In Stock (82)
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout