The H&R 1254001 is a replacement wheel bolt with a 60° tapered seat, built for wheels that seat on a cone. Its specification sheet calls for M12 by 1.5 threads, a 40 mm shank, and a 17 mm wrench, with a silver coating. The manufacturer highlights German manufacturing, which is a useful point when weighing it against cheaper unbranded bolts of unknown steel and origin.
The stronger purchase case is length. The manufacturer states that a wheel spacer should be fitted using longer bolts, which are not included, so you must order them separately. Owners on user forums report swapping stock bolts for longer H&R bolts at the same time as installing spacers, which keeps the wheel properly seated. Before ordering, match the seat type and thread to your hub and wheel, and confirm the extra length your spacer needs. The 40 mm version suits spacer setups where a 38 mm or 43 mm bolt would not give the right engagement. Long-tail searches include: M12x1.5 40mm tapered seat wheel bolt, H&R 1254001 spacer bolt, 60 degree cone seat lug bolt, and extended wheel bolt for wheel spacers.
The manufacturer says spacers mount with longer bolts that are not supplied in the spacer kit. When ordering, state the cone type and the extra length you need.
Yes. The manufacturer lists a black version under part number B1254001, with the same thread, 40 mm length, and 17 mm wrench size.
Torque depends on the vehicle and wheel, so the manufacturer's listing does not give a single value for this bolt. Owners on user forums point to the factory shop manual for the correct wheel torque.
This is a basic bolt-on job for a home mechanic with a 17 mm socket, a torque wrench, and a jack with stands. Remove the stock bolts and wheel, then hand-thread each new bolt so it spins freely and does not cross-thread. The manufacturer's spacer instructions advise snugging the bolts in a star pattern and spinning the wheel to check for rubbing before final torque. Torque in a star pattern to your vehicle's specification. Owners on user forums also recommend re-checking torque after the first 50 to 100 miles on new wheels.