Free Shipping on Orders Over $99  ·  No Code Needed

H&R Wheel Bolts Type 12 X 1.5 Length 38mm Type Tapered Head 17mm

*Photo may not represent actual product

The H&R 1253801 is a single M12 x 1.5 wheel bolt with a 38 mm shank, a 17 mm hex head, and a 60° tapered (cone) seat. The manufacturer's configurator lists it as M12x1,5 with a shaft length of 38 mm and a spanner size of 17, in silver. The black version carries the same geometry under a different code. The black variant is listed as 1253801SW, with the same 38mm length, tapered seat, and 17mm head. The cone seat is the key spec for shoppers searching for a 12x1.5 cone-seat lug bolt for aftermarket wheels or spacer builds. Before buying, check that your wheel uses a matching 60° cone seat and that the bolt length leaves enough thread engagement for your spacer thickness. A cheaper bolt with the wrong seat will not clamp correctly, so matching the seat matters more than the price difference. H&R's spacer guidance states that the spacer should be fitted between the wheel and the hub using longer bolts, which are not supplied with the spacer.

For DIY installs, the process is straightforward but unforgiving of shortcuts. The manufacturer's install guidance says to hand-turn each bolt slowly so it spins in easily and does not cross-thread. Next, snug the bolts in a star pattern, then tighten them with a torque wrench set to the wheel manufacturer's specification. You will need a 17 mm hex socket and a calibrated torque wrench. Owners on user forums recommend re-torquing new wheel installs after the first 50 to 100 miles as the wheel settles. Searches for H&R 12x1.5 tapered wheel bolts, 38mm cone seat lug bolts, and H&R wheel spacer longer bolts all point to this part number.

  • Thread Size: M12 x 1.5
  • Shank Length: 38 mm
  • Seat Type: 60° tapered (cone)
  • Hex Head: 17 mm
  • Finish: Silver (1253801); black version is 1253801SW / B1253801

FAQ:

Is the 1253801 the silver or black version?

The manufacturer lists 1253801 in silver. Its black equivalent is coded B1253801, and the 1253801SW suffix is used on its parts listing for the black version.

Do I need longer bolts for wheel spacers?

The manufacturer's spacer guidance says longer wheel bolts are required with its spacers and must be ordered separately. When ordering, specify the cone type and the extra length needed for your spacer thickness.

What torque should I use?

The manufacturer's install guidance says to tighten in a star pattern with a torque wrench set to the vehicle or wheel manufacturer's specification. No single torque figure for this bolt was confirmed, so use the value from your vehicle or wheel maker.

Installing it yourself

This is a bolt-for-bolt swap that most home mechanics can handle with basic tools. Remove the wheel, start each bolt by hand to avoid cross-threading, and snug all of them in a star pattern before finishing with a torque wrench. Confirm the seat type and bolt length against your wheel and spacer before you remove the old hardware, because a mismatched cone seat is the most common reason a wheel will not torque correctly. Use a 17 mm hex socket, and re-check torque after the first few dozen miles of driving.

  • MPN: 1253801
  • Manufactured by: H&R
  • Units per SKU: 1
  • In Stock: 83
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$3.95

MSRP / List price
Member Price
Your price after signing in
$3.95
In Stock — ships same day if ordered before 5pm PST
Add to Cart:
MPN
1253801
Manufacturer
H&R
Availability
In Stock (83)
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout