This H&R wheel bolt is a 14 x 1.5 fastener with a 60mm threaded length, a 17mm hex head, and a Mercedes ball (R14) seat, finished in black. The manufacturer lists it as a set of ten, which covers a full wheel set. Its extra length suits wheel setups that need more thread engagement than stock bolts provide, and the set is an easy way to replace all four corners at once. Note the seat type before you buy: the manufacturer's 60mm tapered version (1456001SW) uses a different seat, so the two are not interchangeable.
Choose this over a stock bolt when a wheel spacer or a different wheel needs more reach than factory hardware offers. Owners on user forums point out that current H&R R14 seats measure smaller than OEM Mercedes R14 seats, so seat compatibility can vary. Confirm the seat dimensions with the manufacturer before using these on a seat-critical application. Buying from a known specialty brand also means the thread, seat, and head specs come straight from the manufacturer's listing rather than from guesswork. For owners searching for a 14x1.5 R14 ball seat bolt, a 60mm black lug bolt set, or spacer-compatible Mercedes wheel hardware, this part fits that exact spec.
No. The manufacturer lists the tapered version as part 1456001SW, a 60mm bolt with a 60-degree tapered seat and a 17mm head. This set uses a Mercedes ball R14 seat, so the two are not interchangeable.
User forums describe choosing bolt length by adding the spacer thickness to the stock bolt length. Confirm the final length with your spacer maker before installing.
Owners on user forums report that the current H&R R14 seat is smaller than OEM Mercedes R14 seats, and details vary. Contact the manufacturer to confirm seat dimensions for your application.
Swapping these in is a standard lug-bolt replacement that needs only a 17mm hex socket or impact driver. Before you start, confirm that the ball seat matches your wheel's bolt holes, since mixing seat types can prevent the wheel from seating properly. If you are fitting spacers, measure the spacer thickness and stock bolt length first so the new bolts have enough thread engagement. Torque specifications were not confirmed in the manufacturer material reviewed, so check the manufacturer's install sheet or your vehicle's service data before tightening.