The H&R 1453801SW SET is a box of ten 14 x 1.5 wheel bolts with a 38mm length, a 60º tapered seat, and a 17mm head, finished in black. It bridges the gap between short factory fasteners and the longer hardware needed when a wheel or spacer sits farther out from the hub. Because a tapered bolt only seats correctly in a tapered bore, check your wheel's seat type before ordering. A complete ten-piece set also lets you replace every fastener on a wheel with a matched batch instead of mixing singles.
The manufacturer's spacer documentation explains that spacers are mounted between the wheel and the axle by means of longer wheel bolts, so a bolt that is too short will not reach full thread engagement. Choosing this 38mm tapered black set over a generic bolt gives you a known seat profile and thread pitch from a maker that lists these exact specifications. Search terms buyers use for this part include 14x1.5 tapered extended lug bolt, M14x1.5 38mm black wheel bolt, and 60 degree tapered seat spacer bolt.
The manufacturer lists this bolt with a 60º tapered seat, so it is designed for wheels with a matching tapered bore. Confirm your wheel's seat type before ordering, since a mismatched seat can prevent the wheel from clamping properly.
Per the manufacturer, spacers are installed with longer wheel bolts, so the added spacer thickness reduces how far the stock bolt can engage the hub. Measure your spacer thickness and confirm the 38mm length gives adequate thread reach for your setup.
This is a manageable job for anyone comfortable with a jack, jack stands, a 17mm hex socket, and a torque wrench. The manufacturer's spacer instructions call for hand-threading the new bolts so they do not cross-thread, snugging them in a star pattern, and then tightening them with a torque wrench set to the wheel maker's specification. The manufacturer also advises turning the non-driven wheels after installation to confirm the longer bolts clear ABS sensors and brake components. Owners on user forums suggest re-torquing after the first 50 to 100 miles, and the correct torque value must come from your vehicle or wheel documentation rather than a generic number.