Free Shipping on Orders Over $99  ·  No Code Needed

H&R Wheel Bolts 14 X 1.25 / Length 41mm / Tapered / Head 17mm - Black - Set of 10

*Photo may not represent actual product

This is H&R's 14 x 1.25 wheel bolt with a 41 mm shank, a movable 60° taper seat, a 17 mm hex head, and a black finish, sold as a ten-piece set. The manufacturer's listing gives the black taper version as 14254108SW, 14 x 1.25, 41mm, movable taper (60º), 17mm, black, and the set as a box of 10. Because it is a conical-seat bolt, it is meant to seat a wheel on a 60° taper rather than a flat or ball seat, so check your wheel's seat type before ordering. Stock bolts are often too short once a wheel spacer is added. Owners on user forums say they replace the factory bolts with longer H&R bolts when they run spacers, which is the situation this set is built for.

Fitment depends on the hub, not the badge. Confirm your hub uses a 14 x 1.25 stud pattern and that the new bolt's 41 mm length gives full thread engagement with your wheel and spacer stack. The manufacturer's own pages do not list a vehicle application for this exact SKU, so verify it against your vehicle's specification before buying. For DIY installs, start each bolt by hand so the threads do not cross, and seat any spacer flush against the hub first. Owners on user forums also recommend tightening in a star pattern with a torque wrench set to the wheel or vehicle maker's figure.

  • Thread Size: 14 x 1.25 mm
  • Shank Length: 41 mm
  • Seat Type: Movable taper, 60°
  • Hex Head: 17 mm
  • Finish: Black
  • Quantity: Set of 10

FAQ:

Is this bolt sold individually or only as a set?

The manufacturer lists the black taper bolt as a single piece under 14254108SW and as a set of 10 under a separate SET number, so you can buy one or a full set.

Do I need these bolts when I install wheel spacers?

Owners on user forums report replacing the stock bolts with longer H&R bolts when fitting spacers, because the spacer adds thickness that the original bolts cannot cover. Confirm the length against your spacer thickness before installing.

Installing it yourself

Installation is a moderate DIY task: you need a jack and stands, a 17 mm socket, and a calibrated torque wrench. Remove the wheel, seat the spacer flush against the hub, and hand-thread each new bolt so it spins freely before snugging it in a star pattern. Torque to the figure your wheel or vehicle maker specifies. Recheck torque after the first drive, and avoid impact guns, which can damage the threads and seat.

  • MPN: 14254108SW SET
  • Manufactured by: H&R
  • Units per SKU: 1
  • In Stock: 4
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$99.50

MSRP / List price
Member Price
Your price after signing in
$99.50
Only 4 left in stock — order soon
Add to Cart:
MPN
14254108SW SET
Manufacturer
H&R
Availability
Only 4 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout