Free Shipping on Orders Over $99  ·  No Code Needed

Dinan Lug Bolts - Cone Seat - M14x1.25 - 45mm - Black (Set of 10)

*Photo may not represent actual product

These Dinan lug bolts are 45mm steel fasteners with an M14x1.25 thread, an OEM-style cone seat, and a black zinc coating, sold as a set of ten. The manufacturer lists them for use with 15mm and 17mm spacers, so they are built for running wheel spacers, where a longer bolt must reach through the spacer and into the hub. Dinan positions its bolts as engineered for accurate fitment, correct thread size and ideal length especially when used with spacers, which matters because a generic bolt cut to the wrong length can leave a spacer setup under-threaded.

Application depends on chassis. The manufacturer's guide pairs F-chassis 5x120 and G-chassis 5x112 with M14x1.25 bolts, while E-chassis cars use an M12x1.5 thread. The manufacturer also notes exceptions such as the F9x M5/M8 and F48/F39 X1/X2, which utilize the G chassis spacer fitment of 5x112 w/ M14x1.25 bolts. Confirm your chassis, bolt pattern, and spacer thickness before ordering. Enthusiasts searching for M14x1.25 45mm cone seat spacer bolts for F and G chassis BMWs should check these details first.

  • Manufacturer Part Number: D220-0006
  • Thread Size: M14x1.25
  • Length: 45mm
  • Seat Type: Cone (OEM-style)
  • Material: Steel
  • Finish: Black zinc
  • Spacer Thickness: 15mm and 17mm (per manufacturer)
  • Chassis Application: F (5x120) and G (5x112) per manufacturer guide; E chassis uses M12x1.5
  • Quantity: Set of 10
  • UPC: 813725029863

FAQ:

Which spacer thickness is this 45mm bolt designed for?

According to the manufacturer, this bolt is designed for 15mm and 17mm spacers. Owners should measure their spacer before ordering, because a different spacer thickness may call for a different bolt length.

Will these bolts fit an E-chassis BMW?

The manufacturer's application guide lists E-chassis vehicles at 5x120 with M12x1.5 bolts, so this M14x1.25 part does not match that application.

Installing it yourself

Installation is a standard wheel-off job with a few details to get right. Clean and dry the threads and seats, because torque specifications are for dry threads only, and lubricating the hardware threads and seats alters the friction at the lug seat, which throws off torque readings. Torque to the value in your owner's manual, using a torque wrench rather than an impact gun for the final pass, since impact tightening can weaken lug bolts or apply inconsistent torque. Tighten in a star pattern, and re-torque the bolts after driving 50-100 miles. Note that the manufacturer's torque value for this part was not found in research, so use the vehicle's specification.

  • MPN: D220-0006
  • Manufactured by: Dinan
  • Units per SKU: 1
  • On Order: 10
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$45.52

MSRP / List price
Member Price
Your price after signing in
$45.52
Add to Cart:
MPN
D220-0006
Manufacturer
Dinan
Availability
Out of Stock
Ships Within
1–2 Business Days
Member Pricing
Easy Returns
Expert Support
Secure Checkout