The H&R 70406 is a 22mm adjustable front anti-roll bar for the E30 BMW 325e, 325i and 325is. The manufacturer positions its sport stabilizers as a way to provide precise wheel control, reducing body roll along the longitudinal axis and increasing agility in fast corners or during abrupt changes of direction. Owner-maintained E30 reference data on user forums lists the H&R adjustable front bar at 22mm.
Choosing this bar over stock makes most sense for a driver who wants to tune handling balance, not just stiffen the car. The manufacturer notes that the multi-hole adjustment on most H&R anti-roll bars lets owners influence oversteer and understeer behavior. All H&R components have a part approval (if not mentioned differently) for the modification or an ABE (only valid in Germany). Owners searching for an E30 325is front sway bar upgrade or a 22mm adjustable anti-roll bar for a 325i will want to confirm the year range and kit contents against the manufacturer's documentation before ordering.
Mechanically, the bar mounts to the body on rubber bushings held by steel shells, and its ends connect to the wishbones through drop links, so inspect those bushings and links while the bar is out. These drop links operate similarly to ball joints, allowing for lateral movement in the suspension without compromising stiffness, and they wear on the same schedule as other suspension bushings.
Per the manufacturer, H&R sport stabilizers can be installed on the front axle only or on both axles, so a front-only install is a supported option.
The manufacturer states that H&R components carry part approval unless noted otherwise, with an ABE applying in Germany only. Confirm the approval status for your region before installation.
The front bar attaches to the chassis on two rubber bushings and links to the lower wishbones through drop links, so plan to replace worn bushings and links during the job. Confirm with the manufacturer whether bushings and end-link hardware are included in the kit, and use the manufacturer's install instructions for torque specs and bushing orientation.