The H&R 71340 is a 25mm non-adjustable rear sway bar for the 8V-generation Audi A3 quattro, with the same rear bar also listed for the Audi 8V S3, Volkswagen Golf R, Alltrack, Arteon 4Motion, and Tiguan MQB 4Motion. Its fitment is tied to the AWD sedan body, and listings put the sedan years at 2015-2019. Buyers replacing a stock bar should expect a stiffer, fixed-rate rear roll bar that keeps the rear end flatter in corners without changing the factory front setup. Owners on user forums say the rear bar makes the biggest difference when it is the only bar changed, with one reporting that a lot less body roll and better corner handling. Another owner says the car turns sharper once it's weight loaded, though some owners report a firmer ride, so results vary.
H&R describes its sway bar line as crafted from a special 50CrV4 spring steel. The bushings are a urethane/Teflon composite, and one long-term owner reports that his H&R bar with stock end links has been completely silent for nearly three years. Installation is a moderate DIY job, and a lowered car needs adjustable end links to remove preload. Search terms this part matches include 2015-2019 Audi A3 quattro rear sway bar, 25mm non-adjustable rear anti-roll bar, 8V A3 AWD handling upgrade, and H&R 71340 install.
This bar is designed for the quattro AWD sedan only. Confirm your VIN and body style against the manufacturer's fitment lookup before ordering.
Owners on user forums report that a lowered car needs adjustable end links to remove preload. Owners running stock end links on ride-height-stock cars report no problems.
Plan on a driveway job with a jack, jack stands, and standard sockets. Owners on user forums working on the MK8 Golf R, which shares this AWD platform, report that the old bar's bracket can catch on the transmission and may need to be pried off its bushing with a screwdriver and small hammer. They also recommend threading the end links on loosely before torquing the bushing bolts, which makes it easier to line up the holes. Confirm torque specs and hardware with the manufacturer's install sheet before starting.