Free Shipping on Orders Over $99  ·  No Code Needed

H&R 14-18 Volkswagen Jetta S/SE/SEL/GLI MK6 24mm Adj. 2 Hole Sway Bar - Rear

*Photo may not represent actual product

H&R's 24mm rear sway bar (part 71750-24) is a solid, two-hole adjustable anti-roll bar for the MK6 Jetta. The 50CrV4 steel is credited with faster response times and smooth transitional function, and the bar increases roll stiffness to reduce body roll. Owners on user forums describe a 24mm H&R rear bar on for about 80,000 miles with no squeaks at all. That durability matters because H&R's bushings are a urethane/Teflon composite that prevents squeaks and eliminates the need for lubrication. Owners also note that H&R come in 22mm and 24mm typically for the VW Golf/Jetta application, but they come at a premium price. Where a cheaper bar is the alternative, the price difference buys adjustability and a known steel and bushing package.

Stiffness is set at the end links. Per user forums, the hole closest to the end of the bar is the least stiff (more body roll) setting. Owners say the 24mm is a good match for a stock or lowered car that needs more turn-in, and that the soft setting still retains good handling manners while reducing body roll noticeably in turns. Fitment is listed for the 2014-2018 MK6 Jetta S/SE/SEL/GLI, but other listings show wider Jetta year ranges, so confirm your model year with the manufacturer before ordering. Search terms: H&R 71750-24 MK6 Jetta rear sway bar, 24mm adjustable rear anti-roll bar, VW Jetta GLI MK6 rear sway bar upgrade.

  • Manufacturer Part Number: 71750-24
  • Position: Rear
  • Bar Diameter: 24mm
  • Adjustability: 2-hole adjustable forged ends
  • Material: 50CrV4 steel
  • Bushings: Urethane/Teflon composite, no lubrication required
  • Fitment: 2014-2018 Volkswagen Jetta S/SE/SEL/GLI (MK6)
  • Origin: Made in Germany

FAQ:

Does the adjustment change the stiffness?

Per user forums, the hole nearest the end of the bar gives the softest setting with the most body roll, so moving the end link to the inner hole stiffens the bar. Confirm the hole positions against the manufacturer's instructions before setting them.

Do the bushings need grease?

The manufacturer states that the urethane/Teflon bushings are designed to run without lubrication and to prevent squeaks.

Installing it yourself

This is a manageable driveway job. A user who installed a rear bar on an MK6 reported finishing in under an hour, taking their time and taking photos. Expect to use a 16mm wrench and triple-square bits to free the end link nuts, and a 10mm triple square for the bushing clamps. Owners on user forums warn that the end links can be a tight fit, and one reported that they had to attach the links first, to get a better angle before attaching the brackets to the car. Raise the car safely on jack stands or a lift, and torque the bushing clamps and end links to the values in the manufacturer's instructions. Forum posters have reported 15 ft-lbs for the clamps and 30 ft-lbs for the links, but these figures were not confirmed by the manufacturer.

  • MPN: 71750-24
  • Manufactured by: H&R
  • Units per SKU: 1
  • In Stock: 8
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$429.00

MSRP / List price
Member Price
Your price after signing in
$429.00
In Stock — ships same day if ordered before 5pm PST
Add to Cart:
MPN
71750-24
Manufacturer
H&R
Availability
In Stock (8)
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout