This H&R kit pairs a 28mm front bar with a 20mm rear bar for the F32 435i xDrive Coupe, a set meant to reduce body roll in corners without lowering the car. The front bar is two-way adjustable, so you can change its stiffness, while the rear bar is fixed. Owners on user forums who ran this same front and rear combination on an xDrive report a flatter, better-balanced car on the street, though some caution that the 20mm rear bar can unload the inside rear tire on track. Compared with cheaper universal bars, a kit built for the F32 xDrive chassis avoids guesswork about bar length, mounting points, and clearance.
Plan on a substantial install. Owners on user forums say the xDrive rear bar requires lowering the rear subframe, while the front bar means clearing several components that sit in the way of the stock bar. Searches for F32 435i xDrive rear anti-roll bar install, 435i xDrive 28mm front sway bar, and AWD 4-series body roll upgrade will lead to owner discussions that cover these steps. Verify your model year before ordering, because published fitment details differ.
Yes. This kit is built for the AWD xDrive Coupe. Owners on user forums note that xDrive models use different front sway bars than rear-wheel-drive versions, so a bar meant for an RWD car will not fit correctly.
Owners on user forums report that on xDrive models the rear sway bar mounts behind the rear subframe, so the subframe typically needs to be lowered to remove the stock bar and install the new one.
This is a moderate-to-advanced job that suits an experienced home mechanic with a solid jack, quality jack stands, and a full set of sockets and torque tools. Owners on user forums describe the front bar as time-consuming because several parts must be removed to reach the stock bar, and they recommend a second person for some steps. The rear bar job is more tedious than difficult; one owner noted that the rear subframe bolts must be loosened and the subframe carefully lowered by jack. Always support the car on jack stands, never on a jack alone, and check the passenger-side fuel filler neck for clearance when lowering the rear subframe. If you are unsure, have an independent BMW shop perform the work.