Free Shipping on Orders Over $99  ·  No Code Needed

H&R 07-13 BMW 328i Coupe/335i Coupe E92 Sway Bar Kit - 27mm Front/20mm Rear

*Photo may not represent actual product

This H&R Sport sway bar kit replaces both anti-roll bars on the E92 3 Series coupe, pairing a 27mm front bar with a 20mm rear bar. The manufacturer says its Sport bars raise roll stiffness while keeping ride comfort, and that they are made at its ISO 9001 facility in Germany. Owners on user forums describe the stock E92 setup as a 26.5mm front bar and a thin 13mm rear bar, so this kit is a substantial jump, especially at the rear. The front bar is solid rather than hollow, which forum members point to as the reason it resists twisting more than OEM units.

The rear bar is where most owners feel the difference. A 20mm rear bar reduces body roll and helps the car rotate on corner entry, though forum members warn that an overly stiff rear can push the car toward oversteer or traction loss, so pair it with suitable tires and dampers. Most buyers will search for an E92 328i coupe sway bar upgrade, a 335i coupe RWD sway bar kit, or a 27mm front 20mm rear BMW anti-roll bar set, and this kit addresses those needs. Both bars are non-adjustable, so the setup is fixed rather than tunable.

  • Front Bar: 27mm solid, non-adjustable
  • Rear Bar: 20mm, non-adjustable
  • Fitment: 2007–2013 BMW 328i and 335i Coupe (E92), rear-wheel drive
  • Bushings: H&R urethane/Teflon composite
  • Country of Manufacture: Germany

FAQ:

Can I adjust the stiffness of these bars?

Owners on user forums report that the H&R bars for the 335i coupe are non-adjustable, so the stiffness is set by the bar diameter rather than by a hole position.

How much stiffer is this kit than the factory bars?

Owners on user forums describe the factory setup as a 26.5mm front bar and a 13mm rear bar, compared with 27mm front and 20mm rear for this kit. The rear change is the larger one.

Do I need new end links when installing this kit?

Owners on user forums say the original end links do not always have to be replaced if the ride height is unchanged. If the car has been lowered, forum members recommend adjustable end links to avoid preload on the bars.

Installing it yourself

The front bar is generally the easier of the two. The rear bar is the more involved job: owners on user forums report that fitting or replacing rear sway bar bushings typically means lowering the rear subframe, which makes this a garage-level project with a jack, stands, and the right tools. Before you start, check the end links and bushing hardware for wear, and if you have lowered the car, measure and set the end link length to your ride height so the bars are not preloaded.

  • MPN: 72490
  • Manufactured by: H&R
  • Units per SKU: 1
  • In Stock: 3, On Order: 1
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$725.00

MSRP / List price
Member Price
Your price after signing in
$725.00
Only 3 left in stock — order soon
Add to Cart:
MPN
72490
Manufacturer
H&R
Availability
Only 3 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout