The H&R 71220 is a 26mm adjustable rear sway bar for the B6-generation Volkswagen Passat 4Motion, sedan and wagon, in the 2006 to 2011 range. It replaces the factory rear anti-roll bar with a larger solid bar made from 50CrV4 spring steel, which the manufacturer describes as stronger and more resilient than typical competitor bars. Its forged ends offer two adjustment positions, so you can tune rear stiffness without buying a second bar.
Compared with stock or a cheap generic bar, the larger diameter raises rear roll stiffness, which the manufacturer says reduces body roll while adding cornering grip and stability. Owners on user forums report a more planted rear and sharper turn-in on Passats after a larger rear bar swap, though some note a firmer ride over bumps. The shot-peened, heat-treated construction and urethane/Teflon bushings, which the manufacturer says need no lubrication, make this a durable, low-maintenance choice for a B6 Passat 4Motion rear sway bar upgrade.
Listings for this part cover the 2006 to 2011 Volkswagen Passat 4Motion sedan and wagon. Some fitment lists also include related VW and Audi models, so the manufacturer's vehicle selector should be used to confirm your exact car before ordering.
The manufacturer states the urethane/Teflon bushings are designed to run without lubrication, which helps prevent squeaks over time.
Owners on user forums describe this style of rear bar as a straightforward bolt-on job for a driveway with basic hand tools, usually taking somewhere between an hour and a hour and a half. Support the rear securely on jack stands, remove the factory bar with its bushing brackets and end links, then fit the new bushings and end links. Set the bar to your chosen adjustment position, and recheck torque and end-link alignment after the first few drives. Owners on user forums also suggest threadlocker on the threaded fasteners to prevent loosening.