Swapping the factory unit for H&R's 28mm front anti-roll bar gives the 2004-2008 Acura TSX 4-cylinder a stiffer front axle. The bar is crafted from a special (hf) 50CrV4 steel alloy, which H&R describes as the highest tensile strength available, and it has forged ends. H&R completes production at its ISO9001 certified manufacturing facility in Germany, and the finished bars are powder coated for long lasting performance.
Compared with the stock bar, the thicker 28mm section resists body roll more firmly, which sharpens turn-in and keeps the tires loaded through corners. Adjustable end-link positions let you choose a softer setting for commuting or a firmer one for track days. H&R says its sport bars keep ground clearance and spring comfort at OEM level. Some owners on user forums argue that the stock 25mm front bar is already adequate and that stiffer bushings deliver most of the benefit, so this bar makes the most sense when you want a real change in roll stiffness rather than a bushing-only refresh.
Details vary across sources on trim coverage, with some listing the 4-cylinder only and others listing all trim levels. Confirm the application with the manufacturer before ordering.
Owners on user forums report that the front subframe has to be lowered before the front bar can be removed, and that the same lowering is needed to replace the front bushings.
Owners on user forums describe this as a more involved job than a typical end-link swap because of the subframe drop, so plan for a full afternoon with a floor jack and stands. Common tools include a 5mm hex key, 14mm and 17mm wrenches (a ratcheting box-end wrench helps), and grease. Rust-prone areas can seize the end-link nuts, so owners suggest using penetrating oil before you start. Once new end links are fitted, packing grease into the hex socket helps prevent future seizing. Owners suggest torquing end links to roughly 30-40 ft-lbs, but verify the value against the factory service manual.