The Baja Designs OnX6+ 10-inch straight LED light bar in amber (SKU 451014) is a compact auxiliary driving light built around the brand's trademarked High Speed Spot reflector, which uses our trademarked High Speed Spot reflectors for the longest-distance light projection according to the manufacturer. The manufacturer's product page lists this unit under its Wide Cornering pattern with an amber lens, and the OnX6 family housing is Aircraft Grade Aluminum with Mil-Spec Hard Anodize. Against a generic amber bar, the case for this one rests on the brand's backing: a 30-Day Satisfaction Guarantee and Limited Lifetime Warranty come with the 10-inch OnX6.
Dimming is where this bar separates itself from a basic on/off unit. All OnX6 Light bars have a microprocessor that performs thermal management of the LED's and allow a dimming mode. Adding a separate switch that grounds the green control wire lets you reach that mode, and when using the 2nd Switch, the light will dim to 75% power. The OnX6+ family carries IP69K and IK10 ratings on the manufacturer's standards listing, and Baja Designs chooses stainless steel mounting bolts and hardware for their corrosion resistance, which matters for a bar that will see mud, pressure washing, and trail debris.
The bar is listed as universal fitment, and the OnX6 plus LED light bar adopts industry standard sizing and is now compatible with aftermarket mounting systems. Plan for a harness purchase: the wiring harness is not included, and the manufacturer says to use 640115 for the 10-20in OnX6+ bars. Owners on user forums who mounted an OnX6+ on a truck bumper reported that re-aiming the bar meant removing the bumper, and that the brackets secured with 14mm bolts. Searchers looking for a 10 inch amber LED light bar 451014, an OnX6+ wide cornering light, a 640115 on/off harness, or an LED light bar dimming switch will find this listing's details relevant.
No. The manufacturer states the wiring harness is not included. It recommends harness 640115 for on/off operation on 10-20 inch OnX6+ bars, and 640119 is the option for the hi/lo function.
The manufacturer lists this OnX6+ straight bar as Universal. It also states the bar uses industry standard sizing, so it can be mounted with aftermarket mounting systems.
According to the manufacturer, the bar has a microprocessor with a dimming mode. Using a separate switch that grounds the green control wire enables dimming, and a second switch dims the light to 75% power. The manufacturer also includes a plug-and-play low adapter for owners who want it always dimmed without wiring a switch.
The manufacturer provides a 30-day satisfaction guarantee and a limited lifetime warranty on the 10-inch OnX6.
The manufacturer publishes an installation sheet for this SKU, but install difficulty and tool requirements should be confirmed against that sheet. Owners on user forums describe a bumper-mount install: loosely fit the brackets to the bar, secure them to the 14mm bolt points at the back of the bumper, and center the bar on the grille before final angle adjustment. Forum owners also report that re-aiming later requires taking the bumper off again, and that wires must not be pinched when the bumper is reinstalled. Plan to buy the 640115 harness separately, since the bar ships without wiring. Wire the 3-pin WeatherPak connector to a switched 12V source, and add a second switch on the green control wire if you want dimming.
