The Baja Designs OnX6 20-inch Wide Driving Combo (MPN 452014) is a single 20" LED bar in amber, built on the OnX6 platform. The manufacturer describes the OnX6+ housing as mil-spec aluminum, designed to take rough off-road use, with MoistureBlock sealing against water and dust. Lens and optic parts can be swapped under the manufacturer's uService program without voiding the warranty, which makes this a longer-lived buy than a generic bar with a sealed lens. The amber lens suits dust, fog, and low-glare work, where a white beam can wash out the trail.
The manufacturer lists the 20" OnX6+ family as universal, with stainless brackets included, so it fits many bumper, grille, and roof mounts. Wiring is the main planning step. The harness is sold separately: the manufacturer lists the 640115 on/off harness for 10–20" bars, and the 640119 harness for hi/low switching. Owners on user forums report that bumper-mounting often means pulling the bumper or trimming plastic and metal, so check clearance before buying. Search terms this bar matches include 20 inch amber LED light bar wide driving combo, OnX6 universal bumper light bar, and 640115 OnX6 harness.
No. The manufacturer states the harness is not included and lists the 640115 on/off harness for 10–20 inch OnX6+ bars.
Yes. The manufacturer says its uService design allows owners to change damaged lenses or customize the beam pattern without voiding the warranty.
Owners on user forums describe bumper-mount installs as manageable but fiddly. One RAM owner removed the bumper, slid the bar in from the top, secured the brackets with two 14mm bolts at the back of the bumper, and re-aimed the light after reinstalling. An F-150 owner reported trimming roughly an inch of metal on each side behind the bumper covers to fit the brackets, and had to remove plastic clips. Plan on bumper removal, protect wiring from pinching during reassembly, and confirm the harness and switch layout before you mount the bar.
