Borla's S-Type cat-back replaces the stock Ralliart exhaust from the catalytic converter back, for the 2.0L turbocharged four-cylinder AWD model. The layout steps a 2.75-inch pipe down to dual 2.25-inch sections, and the manufacturer finishes the tail with 5-inch round tips. Each system is built from premium stainless steel, and the manufacturer specifies T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409). That material choice, plus a Million-Mile Warranty, is what justifies the premium over a budget muffler system.
Compared with the factory setup, the upgrade mainly changes the exhaust note and flow. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Owners on user forums describe a deeper growl, but also report a drone band around 3000 to 3800 RPM with the stock turbo, and say it can be masked by music or fades after break-in. Keep the sound expectations realistic before buying.
Installation is a bolt-on job for a home mechanic with basic hand tools, and the manufacturer's install sheet lists the required tools. Search terms this part typically matches include 2009-2015 Lancer Ralliart cat-back exhaust, Borla 140334 S-Type, 2.0L turbo AWD catback, and Ralliart 2.75 to dual 2.25 exhaust.
Owners on user forums report that swapping only the cat-back usually does not require a tune, though changing the downpipe at the same time generally does.
The manufacturer's install sheet indicates the system is a bolt-on fit. Owners on user forums say the factory hangers are reused, and that penetrating lubricant helps when removing the stock hardware.
The manufacturer's installation sheet for this cat-back lists a 3/8-inch ratchet, a 3-inch extension, 14mm and 12mm sockets, a pry bar, and spray lubricant. The kit includes the muffler, intermediate pipe, tail pipe, and two 2.75-inch clamps. Owners on user forums describe the job as replacing the OEM midpipe and muffler while keeping the factory hangers, and they warn that the stock bolts can be stubborn, so soak them in penetrating fluid well before you start.