Free Shipping on Orders Over $99  ·  No Code Needed

Borla 09-15 Toyota Tundra 4.6L / 5.7L V8 Crew Max / Double Cab SS Dual Split Catback Exhaust

*Photo may not represent actual product

Borla's 140332 is a Touring-tuned cat-back exhaust for the Toyota Tundra V8 lineup. It uses 2.25-inch dual tubing, a true dual layout, and split side-exiting 4-inch tips made from T-304 stainless steel. The manufacturer says the mandrel-bent tubing and CNC-cut parts are meant to give a close fit. T-304 is the austenitic grade the manufacturer contrasts with cheaper T-409 or aluminized pipe, which is the main reason to pay more for it, since it holds up better to corrosion over years of road salt. The manufacturer also backs the system with a Million-Mile warranty. The Touring setting is mellow at cruise, and the manufacturer specifically describes it as delivering deep sound without drone.

The manufacturer lists fitment for 2009 through 2021 Tundras with the 145.7-inch wheelbase and the 4.6L or 5.7L V8, across Regular, Double and Crew cab configurations. For DIY work, the manufacturer's install sheet describes making a cut directly ahead of the muffler assembly, so plan on a cutting tool and keep the factory hangers and clamps for reinstallation. Owners on user forums say the install is manageable in a driveway with basic tools, but they stress the gasket and clamp details below.

  • Manufacturer Part Number: 140332
  • Exhaust Type: Cat-back, true dual
  • Pipe Diameter: 2.25" dual
  • Tip Size and Style: 4" single round rolled angle-cut
  • Tip Finish: Bright chrome T-304 stainless (black chrome available as part 140332BC)
  • Exit: Truck split side exit
  • Material: T-304 stainless steel
  • Muffler Design: Internal H-pipe, per the manufacturer
  • Vehicle Fitment: 2009–2021 Toyota Tundra, 4.6L/5.7L V8, 145.7" wheelbase
  • Warranty: Million-Mile

FAQ:

Which Tundra years and engines does the manufacturer list for this system?

The manufacturer lists 2009 through 2021 Tundra models with the 145.7-inch wheelbase and the 4.6L or 5.7L V8. Verify your VIN and cab/bed configuration against the manufacturer's fitment lookup before ordering, because some product pages carry a narrower 2009–2015 title.

Does installing this system require cutting the factory exhaust?

Per the manufacturer's install sheet, yes. The sheet describes a cut made directly in front of the muffler assembly, followed by removing the tailpipe and muffler as one unit.

Is the same system available with black tips?

Yes. The manufacturer offers the same system with black chrome T-304 stainless tips under part number 140332BC.

Installing it yourself

Plan on a few hours with a jack or lift, jack stands, a cutting tool, and a muffler stand or a helper to lower the muffler assembly, as the manufacturer's install sheet recommends. Owners on user forums suggest removing the spare tire first to free up working room. They also say the gasket between the resonator and muffler should be replaced during the job, and that the clamp should be checked for alignment before final tightening, with a 15mm deep-well socket needed for the clamp hardware. Install the gasket last before clamping, and do not fully tighten the joints until everything sits where you want it. Start the engine afterward and check every joint for leaks, and confirm clearance from wiring, brake lines, and tires.

  • MPN: 140332
  • Manufactured by: Borla
  • Units per SKU: 1
  • In Stock: 4
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$1,544.99

MSRP / List price
Member Price
Your price after signing in
$1,544.99
Only 4 left in stock — order soon
Add to Cart:
MPN
140332
Manufacturer
Borla
Availability
Only 4 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout