Free Shipping on Orders Over $99  ·  No Code Needed

Borla 09-12 Chevy Corvette C6 Coupe/Convertible 6.2L 8cyl Aggressive ATAK Exhaust

*Photo may not represent actual product

The Borla 11812 is an axle-back exhaust for the 2009-2013 Chevrolet Corvette C6 with the 6.2L V8, sold for both coupe and convertible models. It uses Borla's ATAK (Acoustically-Tuned Applied Kinetics) design, in which the internal muffler cores are tuned vehicle by vehicle, and the manufacturer calls it the most aggressive sound it offers for the C6. The T-304 stainless tubing uses mandrel bends and finishes in dual polished 4-inch tips.

Against stock, the manufacturer says the exterior tone is uncompromising while the cabin stays free of harsh resonance. Owners on user forums describe little drone at cruise, and one who previously ran Borla Stingers said that system droned badly on the highway. Owners also warn that the system can feel too loud with long-tube headers, so a buyer planning headers should weigh that before purchase. Keep the price in perspective: this is a loud, aggressive upgrade, not a quiet one.

Pertinent fitment: the manufacturer's install sheet lists part 11812 for the 6.2L V8 cars, and the Z06's 7.0L uses a different part number. The system fits with or without NPP valves, but it does not include NPP valves. Enthusiasts searching for a 09-13 C6 ATAK axle-back, a C6 6.2L no-drone exhaust, or an NPP-compatible C6 cat-back alternative will find this part matches those needs.

  • Part Number: 11812
  • Fitment: 2009-2013 Chevrolet Corvette (C6), 6.2L V8, automatic or manual transmission, rear-wheel drive, coupe or convertible
  • System Type: Axle-back
  • Sound Technology: Borla ATAK, tuned internal muffler cores
  • Material: T-304 austenitic stainless steel
  • Tips: Dual 4" round polished, rolled angle-cut
  • Exit: Dual split rear exit
  • NPP Valve Compatibility: Fits vehicles with or without NPP; NPP valves not included

FAQ:

Will this fit a Z06 or ZR1?

The manufacturer's install sheet lists part 11812 for the 6.2L V8 C6 cars, and it assigns a different part number to the Z06's 7.0L. Fitment details for the ZR1 vary between sources, so confirm with the manufacturer before ordering.

Does this system work on a car with NPP valves?

Yes. The manufacturer states the system fits vehicles with and without NPP, but it does not include NPP valves.

Is this system too loud for daily driving?

Owners on user forums report mixed experiences. Many describe a quiet, drone-free cruise, while others say the system is loud at wide-open throttle and can feel too loud with long-tube headers.

Installing it yourself

The manufacturer's C6 install sheet for part 11812 calls for a 3/8-inch ratchet with a 3-inch extension, 13mm, 15mm deep-well, and 18mm sockets, a pry bar, and penetrating spray lubricant, and it recommends a professional exhaust shop. Lubricate the hangers and isolators before removal, and let the exhaust cool for at least an hour first. Owners on user forums describe this as a bolt-on job that needs the car raised high enough to clear the axle. The Borla over-axle pipes are not welded to the mufflers, which makes them easier to route. Manual-shift owners report that automatic cars may need the shifter linkage moved to gain clearance. Use the clamps and bolts included with the X-pipe, and do not reuse the factory nuts and studs. Remove the wheelhouse liner rather than just loosening its screws, because the discharge vent tabs break easily.

  • MPN: 11812
  • Manufactured by: Borla
  • Units per SKU: 1
  • In Stock: 2
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$1,999.99

MSRP / List price
Member Price
Your price after signing in
$1,999.99
Only 2 left in stock — order soon
Add to Cart:
MPN
11812
Manufacturer
Borla
Availability
Only 2 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout