The Borla 140341 is a Touring-series cat-back exhaust for the 2009-2013 Chevrolet Silverado 1500 and GMC Sierra 1500 with the 4.8L, 5.3L, or 6.0L V8. The manufacturer describes it as a single 2.75" pipe into the muffler with dual 2.25" outlets, finished in single 4" bright chrome tips on T-304 stainless steel, with a truck split side exit. The manufacturer says the Touring tune delivers a deep, mellow tone with no drone inside the cab. Owners on user forums say the factory exhaust is very quiet, so this system is a clear step up in sound. Compared with cheaper T-409 knockoff systems, the manufacturer specifically contrasts its T-304 tubing as the more durable choice, and it uses ultra-smooth mandrel bends and CNC-cut parts for a precise fit. Owners on user forums also note that the Touring tune is milder than Borla's S-Type, so buyers chasing a louder note should compare the two before ordering. Reports of chrome tip discoloration on Touring systems appear on user forums, so regular polishing is worth planning for.
Search terms this fits: 2009-2013 Silverado 1500 cat-back exhaust, Borla 140341 Touring, 5.3L V8 truck cat-back, 2.75 into dual 2.25 exhaust, T-304 stainless split side exit, no-drone truck exhaust. Because the system bolts to the factory hanger locations, a DIY swap is practical for a mechanically inclined owner with a lift. Confirm your engine, cab, and bed before ordering.
The manufacturer lists this Touring system for 2009 through 2013 Chevrolet Silverado 1500 and GMC Sierra 1500 models with the 4.8L, 5.3L, or 6.0L V8, in the 4-door extended cab with standard bed configuration. Confirm your exact trim and cab before ordering, since the manufacturer's application notes are the final word on fitment.
The manufacturer's install guides for other Silverado 1500 cat-back systems describe cutting the factory pipe with a reciprocating saw ahead of the muffler, then reusing the factory hanger points with new rubber isolators. Expect to cut and re-clamp rather than bolt straight on.
The manufacturer states this system is designed for a mellow tone with no drone inside the vehicle. Owners on user forums describe the Touring tune as a rumble that stays fairly restrained at cruise and opens up under heavy throttle.
The manufacturer recommends that an exhaust shop or professional installer handle this job, and its install guides for related Silverado 1500 cat-back systems call for a hoist or hydraulic lift and a second person. Do not use air impact tools on the fasteners, since they can bend flanges and cause leaks. Typical tools listed in those guides include a 3/8" drive ratchet with a 3" extension, a 10mm socket, a Torx socket, a pry bar, and spray lubricant. Lubricate the hangers and rubber isolators before removal, and expect the factory tailpipe hanger to need a pry bar to free. Plan on roughly two hours for a careful install.