The FOX 981-20-044 is a Factory Race 2.0 x 2.0 bump stop with a stem mount, not a shock absorber. Fox developed its Factory Race bump stops with top off-road racing teams to control the last few inches of suspension travel, so it works as a damper rather than a passive rubber pad. The built-in FOX Air Valve lets you change the nitrogen charge to fine-tune bottoming control, and a replaceable strike pad keeps contact predictable and quiet. The build pairs a Cerakote-coated body over a zinc-plated base with a hard chrome plated 4130 chromoly shaft, black anodized CNC aluminum components, and JM92 MIL-SPEC oil. Choosing this over a basic jounce stop buys adjustable, rebuildable damping that a fixed rubber stop cannot provide.
Check fitment first. Fox's product page sends buyers to a vehicle fitment lookup rather than a fixed application list, so confirm your make, model, and year before ordering. Because this is a stem-mount unit, verify that your existing bump stop mounting point matches the stem design before you commit. For installation, the manufacturer's general guidance calls for a chassis lift with the vehicle fully secured and medium-strength thread-lock on all bolts. Owners searching for Fox 2.0 bump stop stem mount installation, 2.03 inch travel, or FAV nitrogen adjustment should read the owner's manual, which covers installation and tuning.
It is a bump stop. The manufacturer designed it as a stand-alone component to control the final stretch of suspension travel, so it is not a replacement for a main shock.
The manufacturer states that the built-in FOX Air Valve allows nitrogen charge adjustments to change the bottoming control.
The manufacturer describes the unit as owner serviceable and rebuildable, with a replaceable strike pad.
This is a suspension component that requires lifting and securing the vehicle, so it is best suited to DIYers with a chassis lift or equivalent support and a torque wrench. The manufacturer's general installation guidelines say to use a chassis lift, make sure the raised vehicle is securely attached to the lift, and apply medium-strength thread-lock to all bolts. Fox also warns against installing its products without the necessary special tools and expertise. Stem-mount install steps were not confirmed in the research for this listing, so review the manufacturer's installation document for your specific application before you begin.