Dinan's D193-6017 is a supplemental ride quality and handling kit built around four tuned, progressive-rate bump stops for the 2006–2010 BMW E60 M5 sedan. The manufacturer describes it as a bump stop kit for 2006-2010 cars and says it includes four bumpstops. On a lowered E60 M5, the kit is meant to keep usable suspension travel and avoid harsh bottoming, which is the key reason to add it to a Dinan spring set. Search terms it targets include E60 M5 bump stops, 2006-2010 M5 progressive bump stops, and Dinan lowering spring bump stop kit.
Dinan's handling kit literature says the bump stops share part of the dampening work with the shocks, rather than leaving all of it to the shocks, and the company credits this with smoother compression and rebound. Dinan states it uses only OE material instead of urethane replacements, which it says are less refined, and that material detail matters for travel and rebound behavior. That is the practical case for paying more than a generic stop: the manufacturer prioritizes consistent OE-grade behavior over a cheaper substitute.
The manufacturer also states that Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. Though not strictly required, skipping the matching component can produce less favorable ride quality and handling traits. For install planning, Dinan quotes 9.3 hours of labor when the kit is installed by itself.
The manufacturer says the kit is tuned for Dinan's performance spring sets. It is not strictly mandatory, but the manufacturer notes that running it without the matching spring set can lead to poorer ride quality and handling.
The manufacturer lists four bump stops as the kit contents, and says they are made from OE-quality material for progressive compression characteristics.
The manufacturer quotes 9.3 hours of labor when the kit is installed by itself. Plan the bump stop work alongside the spring install where possible, since the kit is designed as a matched set.
Dinan quotes 9.3 hours of labor for this kit when it is installed on its own, so it is a significant job for a home garage. Because the bump stops are tuned to work with Dinan springs, most owners will get the best result by doing both components in one session. Since changing ride height alters suspension geometry, budget for a professional wheel alignment once the work is finished.