The Dinan D193-0121 is a supplemental ride quality and handling kit built around progressive-rate bump stops for the BMW G20 330i and M340i and the G22 M440i xDrive. Dinan lists it as a Supplemental Ride Quality & Handling Kit for 2019-2026 BMW 330i and M340i models and 2021-2026 M440i (xDrive) models. Dinan's stated purpose for these stops is to keep usable suspension travel after the car is lowered, which reduces bottoming out on a lowered G20 or G22.
Most spring makers do not offer replacement bump stops, so lowered cars often keep the factory parts, which can make the ride harsh. Dinan bump stops are matched and tested against the spring rates of their associated Dinan springs, and the stops also help damp the suspension, so the shocks are not doing all of the work alone. Dinan highly recommends pairing the kit with its spring sets, and without the matching component you can expect poorer ride quality and handling traits. Search terms this fits include G20 M340i bump stop upgrade, G22 M440i xDrive lowering spring bottoming out, and BMW G20 handling kit install.
The manufacturer recommends pairing this kit with the matching Dinan Performance Spring Set, and the kit is tuned to those springs. Dinan notes that its springs and handling kit are sold as separate components, so you can buy them individually, but the manufacturer does not confirm performance with non-Dinan springs.
The manufacturer lists labor at about 8.4 hours for xDrive models when the handling kit is installed by itself, with lower times for RWD models. Plan accordingly if you are doing the work in your own garage.
This is a labor-heavy suspension job rather than a quick bolt-on. The manufacturer's published labor estimates are 7.8 hours for the RWD 330i, 8.0 hours for the RWD M340i, and 8.4 hours for xDrive models when the kit is installed by itself. Because the bump stops are tied to the spring setup, the manufacturer recommends installing the kit alongside its matching springs. Confirm the exact procedure, torque specs, and alignment requirements against Dinan's current install documentation before starting, as a kit-specific install sheet was not located during research.