The EBC GD7116 is a front GD Sport slotted rotor for the 2006-2011 Acura CSX (Canada) 2.0. Designed with wide aperture slots to allow cooling, GD Sport rotors are built to reduce brake fade. EBC's GD Series sport rotors are machined in the U.K. from R90-approved blanks, with most castings made in the EU. Compared with a plain OEM-style disc, the slotted face is the reason to pay more: the slots pull air through the contact area and help shed dust and gas under repeated hard stops, which suits spirited street driving and occasional track days. Every rotor is balanced and runout inspected before release.
Corrosion is the other reason to choose it. Now in their third generation, the rotors feature silver corrosion protection. That coating matters on a front hub, where moisture and road salt attack exposed iron. Keep in mind that the fitment is tied to the Canadian 2.0 CSX, so buyers should confirm the application against their VIN before ordering. Searches for "2006-2011 Acura CSX 2.0 front slotted rotors," "EBC GD Sport front brake rotor," and "CSX front brake fade upgrade" point to the right part.
Owners on user forums say new pads and rotors need to bed in before full braking performance arrives. A commonly cited method is 6-10 hard stops from 60 to 30 mph, with cooling time between stops.
Owners on user forums commonly cite about 80 ft-lb for Honda and Acura wheels. Confirm the figure in your service manual before tightening.
Owners on user forums describe this as a manageable driveway job with basic hand tools. Expect a 19mm socket for the lug nuts, a 14mm socket for the caliper guide bolts, a 17mm socket for the bracket bolts, a C-clamp to push the piston back, and an impact driver for the rotor retaining screws. Clean the hub face so the rotor sits flush, and remove the factory corrosion inhibitor from the new rotor with brake parts cleaner before fitting. Owners on user forums note the rotor retaining screws only need to be snug, since the wheel clamps the rotor to the hub.