The EBC GD7402 is a front rotor pair from the brand's 3GD Series sport range, built with slots and dimpled faces for the Nissan Frontier 4.0 2WD. EBC 3GD Series Sport Slotted rotors are the manufacturer's dimpled-and-slotted design, and the set is listed at 11.6 in. diameter. The slots are meant to clear dust and debris from the pad contact zone, and the dimpling is intended to limit stress cracking as the rotor heats up.
The manufacturer says the wider slots can run the rotors up to 200 degrees cooler and help reduce fade at speed and under load. That matters for a Frontier that tows a trailer or hauls heavy loads, where repeated stops build heat quickly. The newer slot layout uses fewer vent slots, which the manufacturer says gives slightly less air noise under heavy braking, though some wind noise may still be noticeable.
Sources disagree on whether this part covers 2WD only or both 2WD and 4WD trucks, and on model-year coverage, so confirm fitment with the manufacturer using your VIN before ordering. Owners on user forums report that 2WD front hubs differ from 4x4 hubs, so do not follow a 4x4 hub guide without checking. They also say a seized rotor sometimes needs a few hammer taps to break free from the hub. Search terms this suits: Frontier 4.0 2WD front brake rotors, 3GD sport slotted dimpled rotors, Frontier towing brake fade rotors.
Yes. The manufacturer lists this as a front set of two rotors, so both sides can be replaced together.
The manufacturer states the current slot layout reduces air noise compared with earlier versions, but it also notes some wind noise is observed. Drivers who find that objectionable can consider the manufacturer's quieter USR slotted rotor.
This is a standard front brake job: remove the wheel, unbolt the caliper and bracket, then slide the old rotor off the hub. Owners on user forums describe removing the dust cap and castle nut on 4x4 hubs, then separating the rotor from the hub. Because 2WD hubs are built differently, check your hub before following those steps. Clean the hub face so the new rotor sits flat, and expect a seized rotor to need persuasion. Owners report that a few light hammer taps often free a rusted rotor.