Free Shipping on Orders Over $99  ·  No Code Needed

EBC 02-08 Pontiac Vibe 1.8 GD Sport Front Rotors

*Photo may not represent actual product

The EBC GD7110 is a vented front rotor from the manufacturer's 3GD Series Sport range. It is designed for use with stock calipers. The manufacturer credits its wide-aperture slots and blind-drilled holes with drawing cooler air in and lowering temperatures to cut brake fade. Dimpling is the other reason to pick it over a plain disc, since it helps the rotor avoid stress cracks. The manufacturer also recommends it for street use and moderate towing.

Fitment needs care. Listings place the GD7110 on the 1.8L Pontiac Vibe, and one lists Fitment 2003-2008 Pontiac Vibe, but year and trim coverage differ between sources. Match your VIN, axle position and brake package before ordering. Shoppers searching for 02-08 Pontiac Vibe 1.8 GD sport front rotors, EBC 3GD slotted dimpled rotors or GD7110 vented front discs are looking for this same application.

Pads matter as much as the rotor. The manufacturer's fitting sheet says new pads must always go on new rotors, because worn pads can cause hot spots that damage them. Rotors should also be replaced as a pair. Owners on user forums report replacing pads and rotors in less than an hour, which makes this a realistic weekend job with basic hand tools.

  • Brand: EBC Brakes
  • Manufacturer part number: GD7110
  • Product line: EBC 3GD Series Sport Rotors
  • Position: Front
  • Rotor style: Vented; slotted and dimpled surface
  • Material: Iron (grey cast iron, per the manufacturer)
  • Intended use: Intended for Street Use: Yes
  • Caliper compatibility: For use with stock calipers
  • Quantity: Sold as a pair.
  • Application: 1.8L Pontiac Vibe, 2003-2008 per listings; confirm by VIN

FAQ:

Do I need new pads when I fit the GD7110 rotors?

Yes. The manufacturer states that new pads must always be fitted after installing new rotors. Use of worn pads on new rotors may create hot spots leading to rotor damage.

Can I buy just one rotor?

No. The GD7110 is sold as a pair, and the manufacturer advises that rotors should always be replaced in pairs.

Which direction should the slots face?

The manufacturer's fitting sheet says the grooves must run from inside to outside in the direction that the disc is rotating. Check the rotation marking on the rotor face before mounting.

Does the GD7110 fit every Pontiac Vibe?

Not confirmed for every model year. Listings differ on year and trim coverage, so confirm fitment with the manufacturer using your VIN, axle position and brake package before ordering.

Installing it yourself

Owners on user forums mention 14mm and 17mm sockets for the brake hardware, along with a 21mm socket for the lug nuts. One forum DIY lists torque the wheels to 76 lb. ft., but confirm the figure in your factory service manual. The manufacturer's fitting sheet lists a dial indicator for run-out, a jack with axle stands and wheel chocks, a torque wrench, and brake cleaner. It also warns that poor condition wheel hubs are the number 1 cause of brake rotor run-out, so clean the hub face thoroughly. Do not hold the rotor with only one or two wheel nuts, because there is a chance of skewing the brake rotor. The manufacturer's guidance is to keep bumping the rotor clockwise another bolt hole as many times as necessary until the run-out reads less than 0.08mm. Owners on user forums recommend greasing slide pins during the job and keep lubricant off the pad friction surface.

  • MPN: GD7110
  • Manufactured by: EBC
  • Units per SKU: 1
  • In Stock: 2
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$274.62

MSRP / List price
Member Price
Your price after signing in
$274.62
Only 2 left in stock — order soon
Add to Cart:
MPN
GD7110
Manufacturer
EBC
Availability
Only 2 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout