Free Shipping on Orders Over $99  ·  No Code Needed

EBC 02-08 Pontiac Vibe 1.8 GT GD Sport Rear Rotors

*Photo may not represent actual product

The EBC GD7111 is a rear rotor from the brand's GD Sport line, a dimpled and slotted design aimed at street performance and spirited daily driving. EBC says its GD discs start from R90-approved blanks, and all rotors including GD Sport Rotors are machined and finished in the UK or in the USA. Each one also passes a 100% run out, metallurgy, and dimensional check, which helps keep pedal feel steady instead of pulsing. The wide-aperture slots are meant to pull cooler air across the friction surface and ease heat-driven fade on repeated hard stops, a clear step up from a plain stock disc. Dimple drilling avoids stress cracks, and current production carries a third-generation finish with silver corrosion protection.

Fitment is where buyers should slow down. This rotor is listed for the 1.8-liter Pontiac Vibe GT, and a forum guide notes that 2003-2008 FWD Corolla, Matrix, and Pontiac Vibe models with rear drum brakes exist, so confirm your rear brake type before ordering. Application year ranges differ between sources, so verify the exact model year with the manufacturer. Owners on user forums also stress cleaning and greasing the caliper slide pins during a rotor swap, since a seized piston that doesn't relieve back into place can cause premature pad wear. Searching for a 2003-2006 Vibe GT rear rotor upgrade, 1.8L dimpled slotted rear rotors, or GD Sport rear brake rotors? This set covers those needs with a documented cooling design and a corrosion-resistant finish.

  • Part Number: GD7111
  • Position: Rear (sold as a pair)
  • Application: Pontiac Vibe GT, 1.8L, rear disc models (model years vary by source; confirm before ordering)
  • Design: Dimpled and slotted GD Sport pattern with wide-aperture slots
  • Blank Origin: R90-approved blanks, machined in the UK or USA
  • Finish: Silver Geomet corrosion protection on current third-generation production; earlier stock may be black

FAQ:

Will these rotors fit every Pontiac Vibe?

No. Owners on user forums describe base Vibes with rear drum brakes, while the GT uses rear discs. Confirm your rear brake setup and trim before ordering, and check the exact model year with the manufacturer.

What should I replace along with the rotors?

Owners on user forums recommend cleaning and greasing the caliper slide pins and checking that the piston retracts freely. A seized piston can wear new pads quickly, so inspect the caliper while the rotor is off.

Why do sources list different fitment years for this part?

Fitment ranges are not consistent across the sources reviewed for this rotor. The manufacturer should be contacted to confirm the exact years covered before purchase.

Installing it yourself

This is a manageable job for a patient home mechanic with basic hand tools. Owners on user forums describe removing the two 14mm bolts that hold the caliper to its mounting bracket, then lifting the caliper off the rotor without letting it hang from the brake hose. You will need a C-clamp or caliper compressor to retract the piston, and some owners siphon brake fluid from the reservoir first. If the old rotor is stuck to the hub, owners report threading a bolt into the rotor's threaded holes to push it free. Before reassembly, clean the bracket, grease the slide pins, and make sure the new pads seat properly.

  • MPN: GD7111
  • Manufactured by: EBC
  • Units per SKU: 1
  • In Stock: 4
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$221.34

MSRP / List price
Member Price
Your price after signing in
$221.34
Only 4 left in stock — order soon
Add to Cart:
MPN
GD7111
Manufacturer
EBC
Availability
Only 4 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout