PowerStop's Z36 Truck & Tow kit replaces the front pads and rotors on the 1995-1999 Ford F-250. The manufacturer builds the Z36 pads from a carbon-fiber ceramic compound designed to hold up better than a typical ceramic pad under heavier loads, and pairs them with drilled and slotted rotors and stainless-steel hardware. For towing a trailer, hauling, or running steep mountain grades, the manufacturer says the setup helps prevent brake fade and brake fluid boil, which stock blank rotors and semi-metallic pads struggle to resist. That makes this kit a practical step up for a heavy-duty truck.
Owners on user forums note that 1999 trucks used different front hub and rotor designs depending on build date, so confirm your truck's build date before ordering a front rotor kit like this one. The swap itself is a standard front-disc job: remove the caliper and bracket, replace the rotors and pads, and reuse the included stainless hardware. Forum members warn that the caliper bracket bolts can be stubborn, so plan on a breaker bar and penetrating oil. After reassembly, pump the pedal before driving, bleed the system, and follow the manufacturer's break-in procedure for a smooth, even pad transfer. Search terms: Z36 truck and tow brake kit F-250 front, carbon ceramic pads towing, drilled slotted rotors 1995-1999 F-250.
User forums report that early-1999 trucks (built before mid-March 1999) use different hubs, and late-build rotors can interfere with early hubs. Check your build date before ordering.
No. This is a pad-and-rotor kit with installation hardware. The manufacturer also offers a Z36 truck and tow kit with powder-coated calipers as a separate product.
After initial bedding, the manufacturer recommends five moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. Some resin odor during this stage is normal.
This is a front-axle job that a mechanically confident DIYer can handle with basic hand tools, a breaker bar, and a torque wrench. Owners on user forums describe removing the caliper bracket to free the rotors, and they recommend penetrating oil on the bracket bolts first. Support the caliper so the brake hose carries none of its weight. Expect hot rotors to imprint pad material if you hold the pedal down, so avoid holding the brake pedal during break-in. The manufacturer's install guidance also covers brake bleeding and break-in as the final steps.