The Power Stop Z26 Street Warrior front kit (K692-26) is a complete front disc brake upgrade for the 1994-2001 Acura Integra. It pairs Z26 carbon-fiber ceramic brake pads with drilled and slotted zinc-plated rotors, and the manufacturer says it is aimed at high-horsepower and modified street cars. The kit ships with stainless-steel shims, stainless hardware, and hi-temp brake lubricant. Compared with stock pads and rotors, the manufacturer positions the ceramic compound as better at handling heat than a typical ceramic pad, which matters once a Integra is pushed harder on canyon roads or at track days. The manufacturer also markets the pads as low-dust and quiet, so you get more stopping power without constantly cleaning black wheel dust. Buyers searching for a K692-26 Integra front brake upgrade, Z26 carbon ceramic pads, or drilled and slotted rotors for a 94-01 Integra FWD should find this kit a solid fit.
Fitment is the first thing to confirm before ordering. Published application lists for this kit vary in their submodel detail, so check your exact year, trim (GS, GS-R, LS, RS, or Special Edition), and drivetrain against the manufacturer's current listing. The kit is designed as a bolt-on replacement for stock front brakes, and the manufacturer states it includes everything needed for installation. The manufacturer also specifies a break-in procedure, which is important for a pad that depends on an even friction layer on the rotor. Do the break-in with a series of moderate-to-aggressive stops from about 40 mph down to 10 mph, avoid holding the brake pedal at a stop while the rotors are hot, and then drive gently for several minutes to let the brakes cool.
The manufacturer's description for this kit lists pads, rotors, and stainless-steel hardware. The manufacturer offers a separate Z26 Street Warrior version that includes powder-coated calipers, so confirm which version you are buying before you order.
Yes. The manufacturer calls the break-in procedure critical to braking performance. It involves a sequence of moderate to aggressive stops from 40 mph down to 10 mph without letting the brakes cool, followed by moderate stops from 35 mph to 5 mph, then a short cool-down drive.
Fitment details for this kit vary across published application lists, so the manufacturer should be the final check. Match your model year, trim, and front-wheel-drive configuration against the manufacturer's current listing before installation.
This is a front brake pad and rotor replacement, so it fits a home garage with a floor jack, jack stands, a torque wrench, and standard metric sockets. The manufacturer states the kit includes everything needed for installation, including pads, rotors, stainless hardware, and lubricant. Check the caliper hardware carefully for pin bushing kits, since the manufacturer notes these are supplied only where applicable. Apply the included hi-temp lubricant to the contact points and slide pins as directed, and use a torque wrench for the caliper bracket and wheel lug nuts. If you open a bleeder screw or loosen a brake line, you will need to bleed the system. Before the first drive, complete the manufacturer's break-in procedure to avoid brake judder and uneven pad transfer. Consult your Integra service manual for exact torque specifications.