Power Stop's Z23 Evolution Sport front kit for the 93-05 Lexus GS300 pairs Z23 carbon-fiber ceramic brake pads with drilled, slotted and zinc-plated rotors, premium stainless-steel hardware and hi-temp brake lubricant. The manufacturer says the Z23 compound significantly enhances braking performance versus traditional ceramic brake pads. The drilled holes and rounded slots maximize cooling and wipe away gas and debris, and the zinc plating helps protect against rust and corrosion. Owners on user forums report a dramatic decrease in brake dust after switching to ceramic pads, which makes this a practical front-end upgrade for a daily-driven GS.
The manufacturer's listing content names GS400, GS430, IS300 and SC430 applications alongside the GS300, and the kit is described as requiring no modifications to the vehicle. Owners on user forums warn that ceramics can be very harsh on the rotors, so budget for rotor wear over time. Keep the break-in procedure in mind: the manufacturer calls break-in critical to brake performance. Search terms: GS300 front brake kit, 93-05 Lexus GS300 ceramic pad and rotor upgrade, Z23 drilled slotted rotors.
The manufacturer's listing for this kit covers pads, rotors, hardware and lubricant. Its powder-coated caliper version is marketed as a separate product, so check the part title before ordering.
Yes. The manufacturer states that a proper break-in establishes an even layer of friction material on the rotors, and warns that holding the pedal down while the rotors are very hot can imprint them.
Owners on user forums report that ceramic pads can be harsh on rotors, and some expect to replace rotors sooner than they would with other pad types.
This is a bolt-on front job that most home mechanics can handle with basic hand tools, a jack and jack stands, and a C-clamp. Owners on user forums say the C-clamp is the key tool for pushing the piston back before fitting new pads. They also recommend applying plenty of brake lube on and between the shims to help prevent squeal, and reservoir level should be checked before compressing the piston. The kit's included lubricant covers these contact points.